Convert DSF to M4R

Turn DSF recordings into M4R. Converted from DSD to AAC in an iPhone ringtone file at 192 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop DSF files on the dialor turn it to pick what to do

A DSD recording as an iPhone ringtone.AAC at 192 kbit/s and up to 48 kHz, with the tags kept.

  1. What you get

    One M4R file, which is the iPhone ringtone format. The DSD audio is converted to AAC at 192 kbit/s and at most 48 kHz. Set Audio bitrate (kbit/s) or Sample rate (Hz) to use other values.

    The tags in the DSF file are kept in the ringtone.

  2. What to know about length

    The iPhone takes ringtones of up to 40 seconds. If your recording runs longer, trim M4R to cut it down to a clip that fits.

  3. Options

    Set Audio bitrate (kbit/s) anywhere from 32 to 320. Higher values make a bigger file. Set Sample rate (Hz) from 8000 to 96000. Lower values make a smaller file and dull high sounds.

    Set Channels to 1 to mix the sound down to mono, which halves its size. Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Turn on Normalize loudness to play quiet and loud recordings at the same level, -16 LUFS. It also resamples to 44.1 kHz unless you set Sample rate (Hz). Set Speed between 0.25 and 4 to play the clip faster or slower, and voices keep their pitch.

  4. When it fails

    The conversion stops with input_corrupted when the file could not be parsed.

DSF and M4R.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 8
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    8000 to 96000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4

The formats

From · DSF

DSD Stream

Direct Stream Digital audio from SACD rips and high-end recorders.

Extensions
.dsf .dff
MIME type
audio/x-dsf
Kind
Audio
To · M4R

iPhone Ringtone

AAC ringtones for iPhone. The same container as M4A; the phone only accepts clips under 40 seconds.

Extensions
.m4r
MIME type
audio/mp4
Kind
Audio

In your code.The same DSF to M4R conversion through the API, for your app or your agent.

terminal
$ cv convert recording.dsf recording.m4r
$ cv convert recording.dsf recording.m4r

Questions.What people ask about DSF to M4R.

01OF 04

Yes. The tags from the DSF file are kept in the M4R file.

The iPhone takes ringtones of up to 40 seconds. Use trim M4R to shorten a longer clip.

Yes. Set Audio bitrate (kbit/s) to a value from 32 to 320. Without it, the file is made at 192 kbit/s.

The file could not be parsed. The conversion stops with this code when it cannot read the DSF file.

More conversions.Other ways in and out of DSF and M4R.