Convert DTS to M4A

Turn DTS recordings into M4A. Re-encoded as AAC at 192 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise, which loses a little more than the DTS already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop DTS files on the dialor turn it to pick what to do

DTS surround sound in an M4A file.The audio is re-encoded as AAC at 192 kbit/s, and surround channels are kept.

  1. What you get

    One M4A file, which is AAC audio in an MP4 container, the format Apple Music and iTunes use. The sound is encoded at 192 kbit/s and at most 48 kHz unless you set Audio bitrate (kbit/s) or Sample rate (Hz) yourself.

    Surround channels are kept. Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech, or to 2 to keep it stereo.

    Turn on Lossless to store the sound as Apple Lossless (ALAC) instead of AAC, which keeps every sample of what is decoded. Audio bitrate (kbit/s) cannot be set together with it.

  2. What it loses

    The conversion re-encodes the sound, and AAC is lossy. It loses a little more than the DTS already did.

    Normalize loudness also resamples the audio to 44.1 kHz unless you give a Sample rate (Hz). If you need another rate, set it as well.

  3. Options for the sound

    Audio bitrate (kbit/s) accepts 32 to 320. 128 is fine for speech and casual listening, and 192 to 320 suits music. A higher value makes a bigger file.

    Normalize loudness makes quiet and loud recordings play at -16 LUFS, the level podcasts and streaming services aim for. Reduce noise lowers steady background noise such as hum, hiss and fans, and leaves sudden noises such as a door in.

    Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at (s). Speed plays faster or slower, from 0.25 to 4, and voices keep their pitch.

  4. When it stops

    If the DTS file cannot be parsed, the conversion stops with input_corrupted.

DTS and M4A.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 8
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    8000 to 96000
  7. 07 · lossless

    Lossless

    Encodes without losing anything where the format can. The result is identical to the input in pixels or samples, and much bigger than a lossy one.

  8. 08 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  9. 09 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  10. 10 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · DTS

DTS Audio

DTS surround audio.

Extensions
.dts
MIME type
audio/vnd.dts
Kind
Audio
To · M4A

M4A Audio

AAC audio in an MP4 container. What Apple Music and iTunes use.

Extensions
.m4a
MIME type
audio/mp4
Kind
Audio

In your code.The same DTS to M4A conversion through the API, for your app or your agent.

terminal
$ cv convert recording.dts recording.m4a
$ cv convert recording.dts recording.m4a

Questions.What people ask about DTS to M4A.

01OF 04

Yes. Surround channels are kept. Set Channels if you want a stereo or mono mix instead.

No. The sound is re-encoded as AAC, which is lossy, so it loses a little more than the DTS already did.

Yes. Set Audio bitrate (kbit/s) to a value from 32 to 320. The default is 192.

The file could not be parsed, so the conversion stops. To go the other way, see M4A to DTS.

More conversions.Other ways in and out of DTS and M4A.