Convert DTS to EAC3

Turn DTS recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the DTS already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop DTS files on the dialor turn it to pick what to do

DTS surround audio as Dolby Digital Plus.One EAC3 file at 192 kbit/s, with the surround channels kept.

  1. What you get

    A single EAC3 file, re-encoded as Dolby Digital Plus (E-AC-3). By default it uses 192 kbit/s, a sample rate of 32, 44.1 or 48 kHz, and up to 5.1 channels. Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change any of these.

    Surround channels are kept, so a 5.1 DTS track stays a surround track.

  2. What it changes

    The audio is encoded again, and that loses a little more than the DTS already did. Set Audio bitrate (kbit/s) higher, from 64 to 320, to give each second of sound more data. Higher makes a bigger file.

    Normalize loudness brings quiet and loud recordings to -16 LUFS. It also resamples to 44.1 kHz unless you set Sample rate (Hz).

  3. Other options

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech, or to 2 to keep it stereo. Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Set Pitch to move the sound up or down by whole semitones without changing the speed. Set Speed to play faster or slower, and voices keep their pitch.

    Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at (s). To go back the other way, use EAC3 to DTS.

DTS and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · DTS

DTS Audio

DTS surround audio.

Extensions
.dts
MIME type
audio/vnd.dts
Kind
Audio
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same DTS to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.dts recording.eac3
$ cv convert recording.dts recording.eac3

Questions.What people ask about DTS to EAC3.

01OF 04

Yes. Surround channels are kept, with up to 5.1 channels by default. Set Channels to change that.

192 kbit/s, unless you set Audio bitrate (kbit/s). It accepts 64 to 320.

Yes. The audio is encoded again, which loses a little more than the DTS already did.

Yes. Set Start at (s) to cut the beginning and Stop at (s) to end at a later second of the original.

More conversions.Other ways in and out of DTS and EAC3.