Convert AC3 to AAC
Turn AC3 recordings into AAC. Re-encoded as AAC in a raw stream at 160 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise, which loses a little more than the AC-3 already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop AC3 files on the dialor turn it to pick what to do
Dolby Digital audio as a raw AAC stream.Surround channels are kept. The audio is re-encoded at 160 kbit/s unless you change it.
What you get
One AAC file, a raw AAC stream, made from the AC3 audio. It is encoded at 160 kbit/s and at most 48 kHz, unless you set Audio bitrate (kbit/s) or Sample rate (Hz) yourself.
Surround channels are kept as they are. Set Channels if you want fewer, for example 1 for mono, which halves the size and suits speech.
What changes
AC3 is already a lossy format, and the conversion encodes the sound again as AAC. That loses a little more than the AC3 already did.
Normalize loudness brings the sound to -16 LUFS. It also resamples to 44.1 kHz unless you set Sample rate (Hz).
Options for the sound
Audio bitrate (kbit/s) takes 32 to 320. 128 is fine for speech and casual listening, and 192 to 320 suits music. A higher value makes a bigger file.
Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
Speed plays the audio faster or slower, from 0.25 to 4, and voices keep their pitch. Set Start at (s) and Stop at (s) to cut the audio. Stop at counts from the start of the original, so it must be later than Start at (s).
When it stops
A file that cannot be parsed stops the conversion with
input_corrupted. No AAC file is made in that case.
AC3 and AAC.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
32 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 8 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
8000 to 96000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
AC-3 Audio
Dolby Digital audio, the surround sound of DVDs.
- Extensions
- .ac3
- MIME type
- audio
/ac3 - Kind
- Audio
AAC Audio
Raw AAC audio streams.
- Extensions
- .aac
- MIME type
- audio
/aac - Kind
- Audio
In your code.The same AC3 to AAC conversion through the API, for your app or your agent.
$ cv convert recording.ac3 recording.aac$ cv convert recording.ac3 recording.aacQuestions.What people ask about AC3 to AAC.
Yes. Surround channels are kept. Set Channels to use fewer.
No. The sound is encoded again, and AAC loses a little more than the AC3 already did.
Yes. Set Audio bitrate (kbit/s) from 32 to 320. Without it, the output uses 160 kbit/s.
Yes. Use AAC to AC3 for that direction.