Convert AC3 to EAC3
Turn AC3 recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the AC-3 already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop AC3 files on the dialor turn it to pick what to do
Dolby Digital Plus from AC-3 audio.The sound is re-encoded as E-AC-3 at 192 kbit/s, with surround channels kept.
What you get
One E-AC-3 file, the Dolby Digital Plus format used by streaming services and Blu-ray. It is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels, unless you set Audio bitrate (kbit/s), Sample rate (Hz) or Channels yourself.
Surround channels are kept, so a 5.1 mix stays a 5.1 mix.
What it costs
The conversion re-encodes the sound. AC-3 is already lossy, so the E-AC-3 file loses a little more than the AC-3 already did. Nothing in the conversion brings back what AC-3 left out.
If you turn on Normalize loudness, the sound is also resampled to 44.1 kHz unless you set Sample rate (Hz).
Options
Set Audio bitrate (kbit/s) between 64 and 320. 128 suits speech and casual listening, and 192 to 320 suits music. A higher value makes a bigger file.
Set Channels to 1 to mix down to mono, which suits speech, or to 2 to keep stereo. Set Sample rate (Hz) between 32000 and 48000. A lower rate makes a smaller file and dulls high sounds.
Reduce noise lowers steady noise such as hum, hiss and fans, and leaves sudden noises in. Normalize loudness brings quiet and loud recordings to -16 LUFS. Pitch moves the sound up or down by whole semitones, and Speed plays it faster or slower with voices keeping their pitch.
Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at (s).
To go the other way, use EAC3 to AC3.
AC3 and EAC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
AC-3 Audio
Dolby Digital audio, the surround sound of DVDs.
- Extensions
- .ac3
- MIME type
- audio
/ac3 - Kind
- Audio
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
In your code.The same AC3 to EAC3 conversion through the API, for your app or your agent.
$ cv convert recording.ac3 recording.eac3$ cv convert recording.ac3 recording.eac3Questions.What people ask about AC3 to EAC3.
Yes. Surround channels are kept, with up to 5.1 channels in the output. Set Channels to a lower number to mix down.
Yes. The sound is re-encoded, and AC-3 is already lossy, so the E-AC-3 file loses a little more.
192 kbit/s, unless you set Audio bitrate (kbit/s) to a value between 64 and 320.
Yes. Set Start at (s) to cut the beginning and Stop at (s) to end earlier. Stop at (s) counts from the start of the original.