Convert EAC3 to AAC
Turn EAC3 recordings into AAC. Re-encoded as AAC in a raw stream at 160 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise, which loses a little more than the E-AC-3 already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop EAC3 files on the dialor turn it to pick what to do
E-AC-3 audio as a raw AAC stream.Re-encoded at 160 kbit/s and at most 48 kHz, with surround channels kept.
What you get
One AAC file holding a raw AAC stream. By default it is encoded at 160 kbit/s and at most 48 kHz. Set Audio bitrate (kbit/s) or Sample rate (Hz) to use other values.
Surround channels are kept. Set Channels to change that: 1 mixes the sound down to mono and 2 keeps it stereo.
What it costs in quality
The audio is re-encoded, and E-AC-3 was already compressed. The result loses a little more than the E-AC-3 already did.
Set Audio bitrate (kbit/s) higher for music. The option text suggests 192 to 320 for music and 128 for speech and casual listening. A higher bitrate makes a bigger file.
Changing the sound
Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
Set Normalize loudness to play quiet and loud recordings at the same loudness, -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).
Set Pitch to move the sound up or down by whole semitones while the speed stays the same. Set Speed to play faster or slower, and voices keep their pitch.
Trimming
Set Start at (s) to cut seconds from the beginning. Decimals such as 1.5 work. Set Stop at (s) to end at a second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
EAC3 and AAC.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
32 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 8 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
8000 to 96000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
AAC Audio
Raw AAC audio streams.
- Extensions
- .aac
- MIME type
- audio
/aac - Kind
- Audio
In your code.The same EAC3 to AAC conversion through the API, for your app or your agent.
$ cv convert recording.eac3 recording.aac$ cv convert recording.eac3 recording.aacQuestions.What people ask about EAC3 to AAC.
160 kbit/s, unless you set Audio bitrate (kbit/s). The sample rate is at most 48 kHz unless you set Sample rate (Hz).
Yes. Surround channels are kept. Set Channels to 1 or 2 to mix down to mono or stereo.
No. The audio is re-encoded, which loses a little more than the E-AC-3 already did.
Yes. AAC to EAC3 goes the other way.