Convert AC3 to OPUS

Turn AC3 recordings into OPUS. Re-encoded as Opus at 96 kbit/s and at 48 kHz, unless audio.bitrate is given, which loses a little more than the AC-3 already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop AC3 files on the dialor turn it to pick what to do

Dolby Digital audio as Opus.The sound is re-encoded as Opus at 96 kbit/s and 48 kHz. Surround channels are kept.

  1. What you get

    One OPUS file, re-encoded from the AC3 audio. Unless you set Audio bitrate (kbit/s), it is written at 96 kbit/s and at 48 kHz. Surround channels are kept.

  2. What it loses

    Both formats are lossy. AC3 already lost some detail, and re-encoding as Opus loses a little more. The result does not match the original exactly.

  3. Options

    Set Audio bitrate (kbit/s) to a value from 32 to 320. The guidance is 128 for speech and casual listening, and 192 to 320 for music. A higher value makes a bigger file.

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set it to 2 to keep stereo.

    Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Turn on Normalize loudness to play quiet and loud recordings at the same loudness, -16 LUFS.

    Set Speed between 0.25 and 4 to play faster or slower. Voices keep their pitch. Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at (s).

  4. When it stops

    A file that cannot be parsed stops the conversion with input_corrupted. To go the other way, use OPUS to AC3.

AC3 and OPUS.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 2
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  7. 07 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  8. 08 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · AC3

AC-3 Audio

Dolby Digital audio, the surround sound of DVDs.

Extensions
.ac3
MIME type
audio/ac3
Kind
Audio
To · OPUS

Opus Audio

Opus audio, the best lossy codec for speech and music at low bitrates.

Extensions
.opus
MIME type
audio/opus
Kind
Audio

In your code.The same AC3 to OPUS conversion through the API, for your app or your agent.

terminal
$ cv convert recording.ac3 recording.opus
$ cv convert recording.ac3 recording.opus

Questions.What people ask about AC3 to OPUS.

01OF 04

Yes. Surround channels are kept. Set Channels to 1 or 2 if you want fewer.

96 kbit/s at 48 kHz, unless you set Audio bitrate (kbit/s). The range is 32 to 320.

Yes. Re-encoding loses a little more than the AC3 already did, because both formats are lossy.

Yes. Set Start at (s) and Stop at (s) to keep only that part of the original.

More conversions.Other ways in and out of AC3 and OPUS.