Convert CAF to WMA
Turn CAF recordings into WMA. Encoded as Windows Media Audio 2 at 160 kbit/s and at most 48 kHz in mono or stereo, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and a lossy track loses a little more than it already had.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop CAF files on the dialor turn it to pick what to do
Apple audio, as a WMA file.Windows Media Audio 2 at 160 kbit/s, in mono or stereo. Tags stay in the file.
What you get
One WMA file made from your CAF recording. By default it is encoded as Windows Media Audio 2 at 160 kbit/s, at no more than 48 kHz, in mono or stereo.
Tags are kept, so the information stored with the recording goes along with it.
What changes
A lossy track loses a little more than it already had. If your CAF holds lossy audio, expect the WMA to carry a bit more loss on top.
Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz). Normalize loudness brings the recording to -16 LUFS, the level podcasts and streaming services aim for.
Options to set
Set Audio bitrate (kbit/s) to change the default of 160. The range is 32 to 320. A higher value makes a bigger file.
Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set Sample rate (Hz) to a value from 8000 to 48000. Lower values make a smaller file and dull high sounds.
Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
Set Start at (s) and Stop at (s) to keep part of the recording. Stop at counts from the start of the original, so it must be later than Start at. Set Speed between 0.25 and 4 to play faster or slower, and voices keep their pitch.
When it fails
A file that cannot be parsed stops the conversion with
input_corrupted. To go the other way, use WMA to CAF.
CAF and WMA.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
32 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 2 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
8000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
Core Audio Format
Apple Core Audio Format.
- Extensions
- .caf
- MIME type
- audio
/x -caf - Kind
- Audio
Windows Media Audio
Windows Media Audio.
- Extensions
- .wma
- MIME type
- audio
/x -ms -wma - Kind
- Audio
In your code.The same CAF to WMA conversion through the API, for your app or your agent.
$ cv convert recording.caf recording.wma$ cv convert recording.caf recording.wmaQuestions.What people ask about CAF to WMA.
Windows Media Audio 2 at 160 kbit/s and at most 48 kHz, in mono or stereo. Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change this.
Yes. Tags are kept in the WMA file.
Not if the CAF holds a lossy track. That kind of track loses a little more than it already had in the conversion.
The file could not be parsed. The conversion stops with input_corrupted when that happens.