Convert EAC3 to WMA

Turn EAC3 recordings into WMA. Re-encoded as Windows Media Audio 2 at 160 kbit/s and at most 48 kHz in mono or stereo, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the E-AC-3 already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop EAC3 files on the dialor turn it to pick what to do

Dolby Digital Plus audio as a WMA file.Re-encoded at 160 kbit/s, in mono or stereo, as one file.

  1. What you get

    One WMA file, encoded as Windows Media Audio 2 at 160 kbit/s and at most 48 kHz. The sound is mono or stereo.

    Surround sound is mixed down to stereo. The E-AC-3 audio was already compressed, and encoding it again loses a little more.

  2. Options

    Set Audio bitrate (kbit/s) to change the 160 default. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file. Set Channels to 1 for mono, which halves the size and suits speech.

    Set Sample rate (Hz) to choose between values such as 44100, the CD rate, and 48000, the video rate. Lower makes a smaller file and dulls high sounds.

    Set Normalize loudness to bring quiet and loud recordings to -16 LUFS. This also resamples to 44.1 kHz unless you set Sample rate (Hz).

  3. Shaping the sound

    Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Set Start at (s) and Stop at (s) to cut the audio. Stop at (s) counts from the start of the original, so it must be later than Start at (s). Set Speed to play faster or slower with the pitch of voices kept, or set Pitch to move the pitch by whole semitones with the speed unchanged.

    For the other direction, see WMA to EAC3.

EAC3 and WMA.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 2
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    8000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio
To · WMA

Windows Media Audio

Windows Media Audio.

Extensions
.wma
MIME type
audio/x-ms-wma
Kind
Audio

In your code.The same EAC3 to WMA conversion through the API, for your app or your agent.

terminal
$ cv convert recording.eac3 recording.wma
$ cv convert recording.eac3 recording.wma

Questions.What people ask about EAC3 to WMA.

01OF 04

No. Surround sound is mixed down to stereo. Set Channels to 1 if you want mono instead.

Yes. The audio is re-encoded, which loses a little more than the E-AC-3 already did.

160 kbit/s, unless you set Audio bitrate (kbit/s). The range is 32 to 320.

Yes. Set Start at (s) to cut the beginning and Stop at (s) to end at a chosen second of the original.

More conversions.Other ways in and out of EAC3 and WMA.