Convert CAF to AC3
Turn CAF recordings into AC3. Encoded as Dolby Digital at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and a lossy track loses a little more than it already had.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop CAF files on the dialor turn it to pick what to do
Apple audio, as Dolby Digital.One AC3 file from your CAF, at 192 kbit/s unless you set otherwise.
What you get
A single AC3 file in Dolby Digital, the surround sound format of DVDs. By default it is encoded at 192 kbit/s, at 32, 44.1 or 48 kHz, with up to 5.1 channels.
Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those defaults.
What changes
AC3 is lossy, so a track that was already lossy loses a little more than it had. Tags are dropped and do not carry over to the AC3 file.
Turn on Normalize loudness to bring quiet and loud recordings to -16 LUFS. This also resamples the audio to 44.1 kHz unless you set Sample rate (Hz).
Shaping the sound
Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second counted from the start of the original. Stop at (s) must be later than Start at (s).
Set Speed to play faster or slower while voices keep their pitch. Reduce noise lowers steady background noise such as hum, hiss and fans, and leaves sudden noises such as a door in place.
Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech.
When it fails
If the CAF file cannot be parsed, the conversion stops with
input_corrupted.To go the other way, use AC3 to CAF.
CAF and AC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
Core Audio Format
Apple Core Audio Format.
- Extensions
- .caf
- MIME type
- audio
/x -caf - Kind
- Audio
AC-3 Audio
Dolby Digital audio, the surround sound of DVDs.
- Extensions
- .ac3
- MIME type
- audio
/ac3 - Kind
- Audio
In your code.The same CAF to AC3 conversion through the API, for your app or your agent.
$ cv convert recording.caf recording.ac3$ cv convert recording.caf recording.ac3Questions.What people ask about CAF to AC3.
No. Tags are dropped during the conversion.
192 kbit/s unless you set Audio bitrate (kbit/s). The range is 64 to 320.
AC3 is lossy, so a lossy track loses a little more than it already had.
Yes. Set Channels to 1 and the sound is mixed down to mono, which halves its size.