Convert EAC3 to DTS
Turn EAC3 recordings into DTS. Re-encoded as DTS at 768 kbit/s and at 44.1 or 48 kHz with up to 5.1 channels, unless audio.sample_rate or audio.channels say otherwise, which loses a little more than the E-AC-3 already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop EAC3 files on the dialor turn it to pick what to do
E-AC-3 audio re-encoded as DTS.One DTS file at 768 kbit/s, with surround channels kept.
What you get
A single DTS file with up to 5.1 channels, at 44.1 or 48 kHz. The bitrate is 768 kbit/s. Surround channels are kept.
The sound is re-encoded, so it loses a little more than the E-AC-3 already did.
Changing the sound
Set Channels to 1 to mix down to mono, which halves the size and suits speech. Set it to 2 to keep stereo. Set Sample rate (Hz) to 44100 or 48000 to choose the rate yourself.
Set Normalize loudness to bring quiet and loud recordings to -16 LUFS. This also resamples to 44.1 kHz unless you give a Sample rate (Hz). Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door stay in.
Speed, pitch and trimming
Set Speed from 0.25 to 4 to play faster or slower. Voices keep their pitch. Set Pitch from -12 to 12 semitones to move the pitch up or down while the speed stays the same.
Set Start at (s) to cut seconds from the beginning. Set Stop at (s) to end at a second of the original. It counts from the start of the original, so it must be later than Start at (s). To go back the other way, use DTS to EAC3.
EAC3 and DTS.What each format is, and the options this conversion takes.
- 01 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 2 - 02 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 03 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 04 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 05 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
44100 to 48000 - 06 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 07 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 08 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
DTS Audio
DTS surround audio.
- Extensions
- .dts
- MIME type
- audio
/vnd .dts - Kind
- Audio
In your code.The same EAC3 to DTS conversion through the API, for your app or your agent.
$ cv convert recording.eac3 recording.dts$ cv convert recording.eac3 recording.dtsQuestions.What people ask about EAC3 to DTS.
Yes. The audio is re-encoded as DTS, which loses a little more than the E-AC-3 already did.
Yes. Surround channels are kept, up to 5.1. Set Channels to 1 or 2 if you want mono or stereo instead.
44.1 or 48 kHz, unless you set Sample rate (Hz). Normalize loudness also resamples to 44.1 kHz unless you give a Sample rate (Hz).
Yes. Set Start at (s) and Stop at (s). Stop at (s) counts from the start of the original file.