Convert W64 to AAC
Turn W64 recordings into AAC. Encoded as AAC in a raw stream at 160 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop W64 files on the dialor turn it to pick what to do
A raw AAC stream from your W64 file.One AAC file at 160 kbit/s, with a sample rate of at most 48 kHz.
What you get
A single AAC file in a raw stream, made from your Wave64 recording. Unless you change them, the audio is encoded at 160 kbit/s and at most 48 kHz.
Set Audio bitrate (kbit/s) to give each second of sound more or less data. 128 is fine for speech and casual listening, and 192 to 320 suits music. A higher bitrate makes a bigger file.
Shaping the sound
Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set it to 2 to keep stereo.
Set Sample rate (Hz) to 44100 for the CD rate or 48000 for the video rate. A lower rate makes a smaller file and dulls high sounds.
Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
Normalize loudness plays quiet and loud recordings at the same loudness, -16 LUFS. It also resamples to 44.1 kHz unless you give a Sample rate (Hz).
Cutting and speed
Set Start at (s) to cut seconds from the beginning. Decimals such as 1.5 work. Set Stop at (s) to end at a second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at (s).
Set Speed to play faster or slower. 2 is twice as fast and 0.5 is half as fast. Voices keep their pitch.
When it stops
If the file cannot be parsed, the conversion stops with
input_corrupted.
W64 and AAC.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
32 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 8 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
8000 to 96000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
Wave64
Sony's 64-bit WAV variant for recordings over 4 GB.
- Extensions
- .w64
- MIME type
- audio
/x -w64 - Kind
- Audio
AAC Audio
Raw AAC audio streams.
- Extensions
- .aac
- MIME type
- audio
/aac - Kind
- Audio
In your code.The same W64 to AAC conversion through the API, for your app or your agent.
$ cv convert recording.w64 recording.aac$ cv convert recording.w64 recording.aacQuestions.What people ask about W64 to AAC.
160 kbit/s, unless you set Audio bitrate (kbit/s). The range is 32 to 320.
Yes. Set Channels to 1 to mix the sound down to mono. This halves its size and suits speech.
The sample rate is at most 48 kHz unless you set Sample rate (Hz). If you turn on Normalize loudness without a sample rate, the audio is resampled to 44.1 kHz.
Yes. Use AAC to W64 for that direction.