Convert WTV to M4A

Turn WTV videos into M4A. Encoded as AAC at 192 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise, and lossy sound loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop WTV files on the dialor turn it to pick what to do

The sound of a recording, as M4A.The audio of a WTV recording becomes one AAC file at 192 kbit/s.

  1. What you get

    One M4A file with the sound of the recording. It is encoded as AAC at 192 kbit/s and at most 48 kHz, unless you set Audio bitrate (kbit/s) or Sample rate (Hz) to something else.

    AAC is lossy, so the sound loses a little more than the broadcast audio already had.

  2. What it leaves behind

    The picture is dropped, since M4A holds only sound. Other audio tracks are dropped too, so only one track is kept.

    A recording with no sound stops with unsupported_elements, because there is nothing to put in the file.

  3. Options for the sound

    Set Audio bitrate (kbit/s) between 32 and 320. 128 suits speech, and 192 to 320 suits music. Set Channels to 1 to mix down to mono, which suits speech.

    Turn on Normalize loudness to bring quiet and loud recordings to -16 LUFS. This also resamples to 44.1 kHz unless you set Sample rate (Hz). Reduce noise lowers steady hum and hiss, and Pitch and Speed change the sound.

    Set Start at (s) and Stop at (s) to keep only part of the recording. Stop at (s) counts from the start of the original.

  4. Lossless audio

    Turn on Lossless to store the audio as Apple Lossless (ALAC) instead of AAC. It keeps every sample of what is decoded. Audio bitrate (kbit/s) cannot be given with it.

WTV and M4A.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 8
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    8000 to 96000
  7. 07 · lossless

    Lossless

    Encodes without losing anything where the format can. The result is identical to the input in pixels or samples, and much bigger than a lossy one.

  8. 08 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  9. 09 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  10. 10 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · WTV

Windows Recorded TV

TV shows recorded by Windows Media Center, usually MPEG-2 or H.264 with broadcast sound.

Extensions
.wtv
MIME type
video/x-ms-wtv
Kind
Video
To · M4A

M4A Audio

AAC audio in an MP4 container. What Apple Music and iTunes use.

Extensions
.m4a
MIME type
audio/mp4
Kind
Audio

In your code.The same WTV to M4A conversion through the API, for your app or your agent.

terminal
$ cv convert clip.wtv clip.m4a
$ cv convert clip.wtv clip.m4a

Questions.What people ask about WTV to M4A.

01OF 04

No. The picture is dropped, and only the sound is kept.

One track is kept. The other audio tracks are dropped.

The video has no sound. There is no audio to put in an M4A file.

Turn on Lossless. The audio is stored as Apple Lossless (ALAC) and keeps every sample of what is decoded.

More conversions.Other ways in and out of WTV and M4A.