Convert WTV to AAC

Turn WTV videos into AAC. Encoded as AAC in a raw stream at 160 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise, and lossy sound loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop WTV files on the dialor turn it to pick what to do

The sound from a recorded TV show, as AAC.One raw AAC file with the show's audio. The picture is left out.

  1. What you get

    A raw AAC stream of the sound from the WTV recording, at 160 kbit/s and at most 48 kHz unless you set otherwise. You get one file.

    AAC is lossy, so the sound loses a little more than it already had in the recording.

  2. What it leaves behind

    The picture is dropped. Other audio tracks are dropped too, so only one track of sound is kept.

    A video with no sound has nothing to convert, and the conversion stops with unsupported_elements.

  3. Options for the sound

    Set Audio bitrate (kbit/s) to change how much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file. Set Sample rate (Hz) to change how often the sound is measured. Lower makes a smaller file and dulls high sounds.

    Set Channels to 1 to mix the sound down to mono, which suits speech. Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises are left in.

    Set Normalize loudness to play quiet and loud recordings at the same loudness, -16 LUFS. It also resamples to 44.1 kHz unless you set Sample rate (Hz).

  4. Cutting and changing speed

    Set Start at (s) to cut seconds from the beginning. Set Stop at (s) to end at a second counted from the start of the original, so it must be later than Start at. To trim an AAC file you already have, see trim AAC.

    Set Speed to play faster or slower, and voices keep their pitch. Set Pitch to move the sound up or down by whole semitones while the speed stays the same.

WTV and AAC.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 8
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    8000 to 96000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · WTV

Windows Recorded TV

TV shows recorded by Windows Media Center, usually MPEG-2 or H.264 with broadcast sound.

Extensions
.wtv
MIME type
video/x-ms-wtv
Kind
Video
To · AAC

AAC Audio

Raw AAC audio streams.

Extensions
.aac
MIME type
audio/aac
Kind
Audio

In your code.The same WTV to AAC conversion through the API, for your app or your agent.

terminal
$ cv convert clip.wtv clip.aac
$ cv convert clip.wtv clip.aac

Questions.What people ask about WTV to AAC.

01OF 04

No. Only the sound is kept. The picture is dropped.

The conversion stops with unsupported_elements, because there is no audio to turn into AAC.

One track is encoded as AAC, and other audio tracks are dropped.

Yes. Lower Audio bitrate (kbit/s), lower Sample rate (Hz), or set Channels to 1 for mono. You can also see compress AAC.

More conversions.Other ways in and out of WTV and AAC.