Convert AAC to EAC3
Turn AAC recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the AAC already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop AAC files on the dialor turn it to pick what to do
Dolby Digital Plus from raw AAC.One EAC3 file at 192 kbit/s, with up to 5.1 channels.
What you get
A single E-AC-3 file, the Dolby Digital Plus format used for surround sound on streaming services and Blu-ray. By default it is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels.
Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those defaults.
What changes
The sound is re-encoded, and the AAC was already lossy. The result loses a little more than the AAC already did.
Tags are dropped, so title and artist information does not carry over.
Normalize loudness also resamples the audio to 44.1 kHz unless you set Sample rate (Hz).
Shaping the sound
Set Start at (s) and Stop at (s) to cut the audio. Stop at counts from the start of the original, so it must be later than Start at. Set Speed to play faster or slower while voices keep their pitch.
Set Pitch to move the sound up or down by whole semitones without changing the speed. Reduce noise lowers steady background noise such as hum, hiss and fans, and leaves sudden noises in. Normalize loudness brings quiet and loud recordings to -16 LUFS.
Set Channels to 1 to mix down to mono, which suits speech. To go the other way, see EAC3 to AAC.
AAC and EAC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
AAC Audio
Raw AAC audio streams.
- Extensions
- .aac
- MIME type
- audio
/aac - Kind
- Audio
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
In your code.The same AAC to EAC3 conversion through the API, for your app or your agent.
$ cv convert recording.aac recording.eac3$ cv convert recording.aac recording.eac3Questions.What people ask about AAC to EAC3.
Yes, a little. The audio is re-encoded, which loses a little more than the AAC already did.
No. Tags are dropped during the conversion.
192 kbit/s unless you set Audio bitrate (kbit/s). It accepts 64 to 320.
Yes. Set Channels to 1 to mix the sound down to mono, which suits speech.