Convert EAC3 to MP2
Turn EAC3 recordings into MP2. Re-encoded as MPEG-1 Audio Layer II at 192 kbit/s or the allowed rate nearest audio.bitrate and at 32, 44.1 or 48 kHz in mono or stereo, unless audio.sample_rate or audio.channels say otherwise, which loses a little more than the E-AC-3 already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop EAC3 files on the dialor turn it to pick what to do
E-AC-3 sound in the MP2 format.The audio is re-encoded as MPEG-1 Audio Layer II, usually at 192 kbit/s.
What you get
One MP2 file. The sound is re-encoded at 192 kbit/s, or at the allowed rate nearest Audio bitrate (kbit/s) if you set it. The sample rate is 32, 44.1 or 48 kHz, in mono or stereo, unless you set Sample rate (Hz) or Channels.
Re-encoding loses a little more than the E-AC-3 already did, so the sound is not identical to the source.
What changes
MP2 here is stereo at most. Surround sound is mixed down to stereo.
Normalize loudness sets the level to -16 LUFS and also resamples to 44.1 kHz, unless you set Sample rate (hz) yourself.
Options
Set Audio bitrate (kbit/s) between 32 and 320. 128 suits speech and casual listening, and 192 to 320 suits music. A higher rate makes a bigger file.
Set Channels to 1 to mix down to mono, which halves the size and suits speech. Lower Sample rate (Hz) for a smaller file, at the cost of duller high sounds.
Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Set Pitch to move the sound up or down by whole semitones, and Speed to play it faster or slower while voices keep their pitch.
Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second counted from the start of the original. Stop at (s) must be later than Start at (s). To trim an MP2 file on its own, see trim MP2.
EAC3 and MP2.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
32 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 2 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
MP2 Audio
MPEG audio layer II, the sound of DVDs, DAB radio and broadcast.
- Extensions
- .mp2
- MIME type
- audio
/mpeg - Kind
- Audio
In your code.The same EAC3 to MP2 conversion through the API, for your app or your agent.
$ cv convert recording.eac3 recording.mp2$ cv convert recording.eac3 recording.mp2Questions.What people ask about EAC3 to MP2.
No. The sound is re-encoded, which loses a little more than the E-AC-3 already did.
No. Surround sound is mixed down to stereo. Set Channels to 1 for mono.
Lower Audio bitrate (kbit/s), set Channels to 1, or lower Sample rate (Hz). A lower sample rate dulls high sounds.
Yes. Set Start at (s) and Stop at (s) to keep the part between them.