Convert MP2 to EAC3

Turn MP2 recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the MP2 already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop MP2 files on the dialor turn it to pick what to do

MP2 audio as Dolby Digital Plus.One EAC3 file at 192 kbit/s, with up to 5.1 channels, unless you set otherwise.

  1. What you get

    A single E-AC-3 file, Dolby Digital Plus, the surround format of streaming services and Blu-ray. By default it is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels.

    Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those defaults.

  2. What changes

    The sound is re-encoded, which loses a little more than the MP2 already did. Tags are dropped, so titles and artist names do not carry over.

    Normalize loudness also resamples to 44.1 kHz unless you set Sample rate (Hz). It brings quiet and loud recordings to -16 LUFS, the level podcasts and streaming services aim for.

  3. Options

    Set Channels to 1 to mix down to mono, which suits speech, or to 2 to keep stereo. Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Set Start at (s) and Stop at (s) to cut the audio. Stop at counts from the start of the original, so it must be later than Start at. Set Speed to play faster or slower with the pitch of voices kept, or set Pitch to move the sound up or down by semitones at the same speed.

    To go the other way, use EAC3 to MP2.

MP2 and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · MP2

MP2 Audio

MPEG audio layer II, the sound of DVDs, DAB radio and broadcast.

Extensions
.mp2
MIME type
audio/mpeg
Kind
Audio
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same MP2 to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.mp2 recording.eac3
$ cv convert recording.mp2 recording.eac3

Questions.What people ask about MP2 to EAC3.

01OF 04

No. Tags are dropped in the conversion.

Yes. The audio is re-encoded, which loses a little more than the MP2 already did.

192 kbit/s by default. Set Audio bitrate (kbit/s) to a value from 64 to 320 to change it.

Yes. Set Start at (s) to cut from the beginning and Stop at (s) to end at a later second of the original.

More conversions.Other ways in and out of MP2 and EAC3.