Convert MPC to WMA
Turn MPC recordings into WMA. Re-encoded as Windows Media Audio 2 at 160 kbit/s and at most 48 kHz in mono or stereo, unless audio.bitrate or audio.sample_rate say otherwise, which loses a little more than the Musepack already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop MPC files on the dialor turn it to pick what to do
Musepack audio as a WMA file.One WMA file, re-encoded at 160 kbit/s unless you choose otherwise.
What you get
A single WMA file in Windows Media Audio 2, in mono or stereo, at 160 kbit/s and a sample rate of at most 48 kHz. Set Audio bitrate (kbit/s) or Sample rate (Hz) to change those defaults.
What changes
Musepack is already lossy, and WMA is lossy too. The conversion encodes the sound a second time, so it loses a little more than the Musepack already did.
Turn on Normalize loudness and the audio is brought to -16 LUFS. This also resamples it to 44.1 kHz unless you set Sample rate (Hz).
Options
Set Audio bitrate (kbit/s) between 32 and 320. A higher value gives a bigger file. Set Sample rate (Hz) between 8000 and 48000. A lower rate makes a smaller file and dulls high sounds.
Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door stay in.
Set Start at (s) to cut the beginning. Set Stop at (s) to end earlier. Stop at counts from the start of the original, so it must be later than Start at. Speed plays the audio from 0.25 to 4 times as fast, and voices keep their pitch.
When it fails
If the file cannot be parsed, the conversion stops with
input_corrupted.To go the other way, use WMA to MPC.
MPC and WMA.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
32 to 320 - 02 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 03 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 04 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 05 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
8000 to 48000 - 06 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 07 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 08 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
Musepack
Musepack, a lossy audio codec tuned for transparent quality at mid bitrates.
- Extensions
- .mpc
- MIME type
- audio
/x -musepack - Kind
- Audio
Windows Media Audio
Windows Media Audio.
- Extensions
- .wma
- MIME type
- audio
/x -ms -wma - Kind
- Audio
In your code.The same MPC to WMA conversion through the API, for your app or your agent.
$ cv convert recording.mpc recording.wma$ cv convert recording.mpc recording.wmaQuestions.What people ask about MPC to WMA.
Yes, a little. Both formats are lossy, and the sound is encoded again, so it loses a bit more than the Musepack already did.
160 kbit/s unless you set Audio bitrate (kbit/s). It accepts values from 32 to 320.
Yes. Set Start at (s) to cut the beginning and Stop at (s) to end earlier. Stop at counts from the start of the original.
The file could not be parsed, so the conversion stops with input_corrupted.