Convert MPC to EAC3

Turn MPC recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate or audio.sample_rate say otherwise, which loses a little more than the Musepack already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop MPC files on the dialor turn it to pick what to do

Musepack audio as Dolby Digital Plus.One EAC3 file at 192 kbit/s, with up to 5.1 channels.

  1. What you get

    A single Dolby Digital Plus (E-AC-3) file, the surround format of streaming services and Blu-ray. By default it is encoded at 192 kbit/s and at a sample rate of 32, 44.1 or 48 kHz, with up to 5.1 channels.

    Set Audio bitrate (kbit/s) to a value from 64 to 320 to change the bitrate. Set Sample rate (Hz) to a value from 32000 to 48000 to change the sample rate.

  2. What changes

    Musepack is already lossy, and E-AC-3 is lossy too. The audio is encoded a second time, so it loses a little more than the Musepack file already had.

    Turn on Normalize loudness and the audio is set to -16 LUFS. It is also resampled to 44.1 kHz unless you set Sample rate (Hz).

  3. Shaping the sound

    Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door stay in.

    Set Pitch to move the sound up or down by whole semitones, from -12 to 12, without changing the speed. Set Speed from 0.25 to 4 to play faster or slower while voices keep their pitch.

    Set Start at (s) to cut seconds from the beginning. Set Stop at (s) to end at a second of the original. It counts from the start of the original, so it must be later than Start at (s).

    To go the other way, use EAC3 to MPC.

MPC and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  3. 03 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  4. 04 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  5. 05 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  6. 06 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  7. 07 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  8. 08 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · MPC

Musepack

Musepack, a lossy audio codec tuned for transparent quality at mid bitrates.

Extensions
.mpc
MIME type
audio/x-musepack
Kind
Audio
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same MPC to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.mpc recording.eac3
$ cv convert recording.mpc recording.eac3

Questions.What people ask about MPC to EAC3.

01OF 04

Yes, a little. Both formats are lossy, so the second encoding loses a little more than the Musepack file already had.

192 kbit/s by default. Set Audio bitrate (kbit/s) to a value from 64 to 320 to change it.

Yes. Set Start at (s) to cut the beginning and Stop at (s) to end at a later second of the original.

Yes. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).

More conversions.Other ways in and out of MPC and EAC3.