Convert TRUEHD to WMA

Turn TRUEHD recordings into WMA. Encoded as Windows Media Audio 2 at 160 kbit/s and at most 48 kHz in mono or stereo, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop TRUEHD files on the dialor turn it to pick what to do

Blu-ray surround sound as a WMA file.Windows Media Audio 2 at 160 kbit/s, in mono or stereo.

  1. What you get

    One WMA file, encoded as Windows Media Audio 2 at 160 kbit/s. The sample rate is at most 48 kHz, and the sound is mono or stereo, unless you set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to something else.

    Surround sound is mixed down to stereo, because the output has at most two channels. The lossless TrueHD stream is encoded again as WMA, so the result is not a copy of the original sound.

  2. Options

    Set Audio bitrate (kbit/s) between 32 and 320. 128 suits speech and casual listening, and 192 to 320 suits music. A higher value makes a bigger file.

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set Sample rate (Hz) between 8000 and 48000. A lower rate makes a smaller file and dulls high sounds.

    Set Start at (s) and Stop at (s) to keep part of the recording. Stop at counts from the start of the original, so it must be later than Start at.

  3. Changing the sound

    Turn on Normalize loudness to play quiet and loud recordings at the same level, -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).

    Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Set Speed between 0.25 and 4 to play faster or slower, and voices keep their pitch. Set Pitch between -12 and 12 to move the pitch by semitones while the speed stays the same.

TRUEHD and WMA.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 2
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    8000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · TRUEHD

Dolby TrueHD Audio

Dolby TrueHD, the lossless surround sound of Blu-ray, as a raw .thd stream, and the MLP of DVD-Audio it grew from.

Extensions
.thd .truehd .mlp
MIME type
audio/vnd.dolby.mlp
Kind
Audio
To · WMA

Windows Media Audio

Windows Media Audio.

Extensions
.wma
MIME type
audio/x-ms-wma
Kind
Audio

In your code.The same TRUEHD to WMA conversion through the API, for your app or your agent.

terminal
$ cv convert recording.thd recording.wma
$ cv convert recording.thd recording.wma

Questions.What people ask about TRUEHD to WMA.

01OF 04

No. Surround sound is mixed down to stereo. Set Channels to 1 if you want mono instead.

160 kbit/s, unless you set Audio bitrate (kbit/s). You can choose any value from 32 to 320.

Yes. The TrueHD format covers raw .thd streams and the MLP of DVD-Audio it grew from.

Yes. Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a later second of the original. See every WMA conversion for other sources.

More conversions.Other ways in and out of TRUEHD and WMA.