Convert TRUEHD to EAC3

Turn TRUEHD recordings into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop TRUEHD files on the dialor turn it to pick what to do

Surround sound in a Dolby Digital Plus file.TrueHD audio becomes E-AC-3 at 192 kbit/s, with surround channels kept.

  1. What you get

    One E-AC-3 file, which is Dolby Digital Plus, the surround sound of streaming services and Blu-ray. It is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels.

    Surround channels are kept. Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change any of these.

  2. Options for the sound

    Audio bitrate (kbit/s) runs from 64 to 320. 128 suits speech and casual listening, and 192 to 320 suits music. A higher value makes a bigger file.

    Set Channels from 1 to 6. 1 mixes the sound down to mono, and 2 keeps it stereo. Set Sample rate (Hz) from 32000 to 48000. A lower rate makes a smaller file and dulls high sounds.

    Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Set Normalize loudness to play quiet and loud recordings at the same loudness, -16 LUFS. Normalizing also resamples to 44.1 kHz unless you give Sample rate (Hz).

  3. Trim, speed and pitch

    Set Start at (s) to cut seconds from the beginning. Set Stop at (s) to end at a second of the original. It counts from the start of the original, so it must be later than Start at (s).

    Set Speed from 0.25 to 4 to play faster or slower, and voices keep their pitch. Set Pitch from -12 to 12 to move the sound up or down in semitones while the speed stays the same.

    For other targets, see every EAC3 conversion.

TRUEHD and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · TRUEHD

Dolby TrueHD Audio

Dolby TrueHD, the lossless surround sound of Blu-ray, as a raw .thd stream, and the MLP of DVD-Audio it grew from.

Extensions
.thd .truehd .mlp
MIME type
audio/vnd.dolby.mlp
Kind
Audio
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same TRUEHD to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.thd recording.eac3
$ cv convert recording.thd recording.eac3

Questions.What people ask about TRUEHD to EAC3.

01OF 04

Yes. Surround channels are kept, up to 5.1 channels, unless you change Channels.

192 kbit/s, unless you set Audio bitrate (kbit/s). The range is 64 to 320.

Yes. Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech.

Yes. Set Start at (s) and Stop at (s) to choose where the audio begins and ends.

More conversions.Other ways in and out of TRUEHD and EAC3.