Convert TS to AAC

Turn TS videos into AAC. Encoded as AAC in a raw stream at 160 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise, and lossy sound loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop TS files on the dialor turn it to pick what to do

The sound of a TS video as AAC.The audio becomes a raw AAC stream. The picture is not kept.

  1. What you get

    One AAC file with the sound of the video. It is encoded at 160 kbit/s and at most 48 kHz, unless you set Audio bitrate (kbit/s) or Sample rate (Hz) to something else.

    AAC is lossy, so the sound loses a little more than it already had.

  2. What it leaves behind

    The picture is dropped, since the output holds only sound. Other audio tracks are dropped too.

    A video without sound fails with unsupported_elements. That code also appears when the file holds something AAC cannot carry.

  3. Shaping the sound

    Set Audio bitrate (kbit/s) to choose how much data each second gets. 128 is fine for speech and casual listening, and 192 to 320 suits music. Higher makes a bigger file.

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Turn on Normalize loudness to bring quiet and loud recordings to -16 LUFS. Normalizing also resamples to 44.1 kHz unless you give Sample rate (Hz).

    Set Start at (s) and Stop at (s) to keep only part of the video. Stop at (s) counts from the start of the original, so it must be later than Start at (s). Set Speed to play faster or slower, and voices keep their pitch. To cut the video itself, use trim TS.

TS and AAC.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 8
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    8000 to 96000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · TS

MPEG Transport Stream

MPEG transport streams, the container of broadcast and HLS video.

Extensions
.ts .m2ts .mts
MIME type
video/mp2t
Kind
Video
To · AAC

AAC Audio

Raw AAC audio streams.

Extensions
.aac
MIME type
audio/aac
Kind
Audio

In your code.The same TS to AAC conversion through the API, for your app or your agent.

terminal
$ cv convert clip.ts clip.aac
$ cv convert clip.ts clip.aac

Questions.What people ask about TS to AAC.

01OF 04

No. The picture is dropped, and only the sound is written.

A video without sound stops with this code. It also appears when the file holds something AAC cannot carry.

If the file cannot be parsed, the conversion stops with input_corrupted.

Yes. Set Channels to 1 to mix the sound down to mono. Set it to 2 to keep stereo.