Convert TS to EAC3
Turn TS videos into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and lossy sound loses a little more than it already had.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop TS files on the dialor turn it to pick what to do
The sound of a TS file as E-AC-3.One audio file in Dolby Digital Plus, made from the sound of the video.
What you get
A single EAC3 file with the sound of the TS video. By default it is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels.
The encoding is lossy, so the sound loses a little more than it already had.
What is left behind
The picture is dropped, and so are any other audio tracks. Only one track of sound is kept.
A video without sound has nothing to convert, so the conversion stops with
unsupported_elements.Options
Set Audio bitrate (kbit/s) to give each second of sound more or less data. 128 is fine for speech and casual listening, and 192 to 320 suits music. Higher makes a bigger file.
Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set Sample rate (Hz) to change how often the sound is measured. Lower makes a smaller file and dulls high sounds.
Set Start at (s) and Stop at (s) to keep only part of the video. Stop at counts from the start of the original, so it must be later than Start at.
Reduce noise lowers steady background noise such as hum, hiss and fans. Normalize loudness plays quiet and loud recordings at -16 LUFS, and it also resamples to 44.1 kHz unless you set Sample rate (Hz). Set Speed to play faster or slower, and Pitch to move the pitch by semitones without changing the speed.
TS and EAC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
MPEG Transport Stream
MPEG transport streams, the container of broadcast and HLS video.
- Extensions
- .ts .m2ts .mts
- MIME type
- video
/mp2t - Kind
- Video
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
In your code.The same TS to EAC3 conversion through the API, for your app or your agent.
$ cv convert clip.ts clip.eac3$ cv convert clip.ts clip.eac3Questions.What people ask about TS to EAC3.
No. Only the sound is kept. The picture is dropped.
The video has no sound, so there is no audio to turn into EAC3.
No. Other audio tracks are dropped.
Yes. Set Start at (s) to cut from the beginning, and Stop at (s) to end at a given second of the original.