Convert TTA to AAC
Turn TTA recordings into AAC. Encoded as AAC in a raw stream at 160 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop TTA files on the dialor turn it to pick what to do
TTA audio as a raw AAC stream.One file comes out, encoded at 160 kbit/s unless you set another bitrate.
What you get
A raw AAC stream in a single file. The audio is encoded as AAC at 160 kbit/s and at most 48 kHz, unless you set Audio bitrate (kbit/s) or Sample rate (Hz) to something else.
Tags are dropped, so the AAC file does not carry the information that was stored in the TTA file.
Options you can set
Set Audio bitrate (kbit/s) to a value from 32 to 320. The option text suggests 128 for speech and casual listening, and 192 to 320 for music. A higher value makes a bigger file.
Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set it to 2 to keep stereo. Set Sample rate (Hz) to change how often the sound is measured. A lower value makes a smaller file and dulls high sounds.
Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Normalize loudness plays quiet and loud recordings at the same loudness, -16 LUFS. It also resamples to 44.1 kHz unless you set Sample rate (Hz).
Set Speed to play faster or slower, from 0.25 to 4. Voices keep their pitch. Set Start at (s) and Stop at (s) to cut the audio. Stop at (s) counts from the start of the original, so it must be later than Start at (s).
When it fails
If the TTA file cannot be parsed, the conversion stops with
input_corrupted.
TTA and AAC.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
32 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 8 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
8000 to 96000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
True Audio
True Audio, a simple lossless codec.
- Extensions
- .tta
- MIME type
- audio
/x -tta - Kind
- Audio
AAC Audio
Raw AAC audio streams.
- Extensions
- .aac
- MIME type
- audio
/aac - Kind
- Audio
In your code.The same TTA to AAC conversion through the API, for your app or your agent.
$ cv convert recording.tta recording.aac$ cv convert recording.tta recording.aacQuestions.What people ask about TTA to AAC.
160 kbit/s, unless you set Audio bitrate (kbit/s). The range is 32 to 320.
No. Tags are dropped during conversion.
Yes. Use AAC to TTA for that direction.
The file could not be parsed. The conversion stops with input_corrupted when that happens.