Convert TTA to EAC3

Turn TTA recordings into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop TTA files on the dialor turn it to pick what to do

Lossless TTA audio as Dolby Digital Plus.The sound is encoded as E-AC-3 at 192 kbit/s with up to 5.1 channels.

  1. What you get

    One E-AC-3 file, the Dolby Digital Plus format used for streaming services and Blu-ray. By default it is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels.

    Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those defaults. Audio bitrate (kbit/s) runs from 64 to 320, Sample rate (Hz) from 32000 to 48000, and Channels from 1 to 6.

  2. What changes

    Tags are dropped, so the title, artist and other tags in the TTA file are not in the E-AC-3 file.

    Set Channels to 1 to mix the sound down to mono, which suits speech. Set it to 2 to keep stereo. A higher Audio bitrate (kbit/s) makes a bigger file, and a lower Sample rate (Hz) makes a smaller one and dulls high sounds.

  3. Shaping the sound

    Set Normalize loudness to bring quiet and loud recordings to -16 LUFS, the level podcasts and streaming services aim for. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).

    Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Set Pitch to move the sound up or down by whole semitones without changing its speed, and Speed to play it faster or slower while voices keep their pitch.

    To keep only part of the track, set Start at (s) to cut seconds from the beginning and Stop at (s) to end at a second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at (s). To cut a TTA file without changing its format, see trim TTA.

TTA and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · TTA

True Audio

True Audio, a simple lossless codec.

Extensions
.tta
MIME type
audio/x-tta
Kind
Audio
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same TTA to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.tta recording.eac3
$ cv convert recording.tta recording.eac3

Questions.What people ask about TTA to EAC3.

01OF 04

No. Tags are dropped in the conversion.

192 kbit/s unless you set Audio bitrate (kbit/s). The option accepts 64 to 320.

Yes. Set Channels to 1 and the sound is mixed down to mono, which suits speech.

Yes. See EAC3 to TTA for the reverse conversion.

More conversions.Other ways in and out of TTA and EAC3.