Convert M4A to AC3

Turn M4A recordings into AC3. Encoded as Dolby Digital at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and AAC audio loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop M4A files on the dialor turn it to pick what to do

M4A audio as Dolby Digital.You get one AC3 file at 192 kbit/s, with up to 5.1 channels.

  1. What you get

    One AC3 file, encoded as Dolby Digital at 192 kbit/s. The sample rate is 32, 44.1 or 48 kHz, and the file has up to 5.1 channels.

    Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change these. Audio bitrate (kbit/s) runs from 64 to 320, and Channels runs from 1 to 6.

  2. What it changes

    M4A holds AAC audio, and AAC is lossy. Encoding it again as Dolby Digital loses a little more than the file already had.

    Tags and cover art are dropped. Nothing in the AC3 file carries the title, artist or album picture from the M4A.

  3. Shaping the sound

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set it to 2 to keep stereo.

    Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Turn on Normalize loudness to play quiet and loud recordings at the same loudness, -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).

    Set Speed to play faster or slower, from 0.25 to 4. Voices keep their pitch. Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at (s). To trim without other changes, see trim M4A.

  4. When it fails

    If the M4A cannot be parsed, the conversion stops with input_corrupted.

M4A and AC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · M4A

M4A Audio

AAC audio in an MP4 container. What Apple Music and iTunes use.

Extensions
.m4a
MIME type
audio/mp4
Kind
Audio
To · AC3

AC-3 Audio

Dolby Digital audio, the surround sound of DVDs.

Extensions
.ac3
MIME type
audio/ac3
Kind
Audio

In your code.The same M4A to AC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.m4a recording.ac3
$ cv convert recording.m4a recording.ac3

Questions.What people ask about M4A to AC3.

01OF 04

No. Tags and cover art are dropped from the AC3 file.

No. AAC is lossy, and encoding it as Dolby Digital loses a little more than it already had.

Yes. Set Channels to 1 to mix the sound down to mono.

The file could not be parsed. The conversion stops with input_corrupted when that happens.

More conversions.Other ways in and out of M4A and AC3.