Convert M4R to AC3

Turn M4R recordings into AC3. Re-encoded as Dolby Digital at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the AAC already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop M4R files on the dialor turn it to pick what to do

Ringtone audio as Dolby Digital.The clip is re-encoded as AC3 at 192 kbit/s unless you set otherwise.

  1. What you get

    One AC3 file, re-encoded as Dolby Digital. The default is 192 kbit/s, a sample rate of 32, 44.1 or 48 kHz, and up to 5.1 channels. Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change any of these.

    An M4R file is AAC, and AC3 is encoded again from it. This loses a little more than the AAC already did.

  2. What it leaves behind

    Tags and cover art are dropped. The AC3 file carries the sound only.

    Normalize loudness also resamples the audio to 44.1 kHz unless you give a value in Sample rate (Hz). It brings quiet and loud recordings to -16 LUFS.

  3. Options for the sound

    Set Channels to 1 to mix the sound down to mono, which suits speech. Set Channels to 2 to keep it stereo. Higher values of Audio bitrate (kbit/s) give each second of sound more data and make a bigger file.

    Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Set Start at (s) to cut seconds from the beginning. Set Stop at (s) to end at a second counted from the start of the original, so it must be later than Start at (s). Set Speed to play faster or slower while voices keep their pitch.

  4. Failures

    A file that cannot be parsed stops the conversion with input_corrupted.

M4R and AC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · M4R

iPhone Ringtone

AAC ringtones for iPhone. The same container as M4A; the phone only accepts clips under 40 seconds.

Extensions
.m4r
MIME type
audio/mp4
Kind
Audio
To · AC3

AC-3 Audio

Dolby Digital audio, the surround sound of DVDs.

Extensions
.ac3
MIME type
audio/ac3
Kind
Audio

In your code.The same M4R to AC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.m4r recording.ac3
$ cv convert recording.m4r recording.ac3

Questions.What people ask about M4R to AC3.

01OF 04

No. Tags and cover art are dropped.

No. The sound is encoded again, which loses a little more than the AAC already did.

Yes. Set Channels to 1 and the sound is mixed down to mono, which suits speech.

The file could not be parsed. The conversion stops with input_corrupted when that happens.

More conversions.Other ways in and out of M4R and AC3.