Convert WAV to AC3
Turn WAV recordings into AC3. Encoded as Dolby Digital at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop WAV files on the dialor turn it to pick what to do
Dolby Digital audio from your WAV file.One AC3 file at 192 kbit/s, the surround format of DVDs.
What you get
A single AC3 file encoded as Dolby Digital. It uses 192 kbit/s and a sample rate of 32, 44.1 or 48 kHz, with up to 5.1 channels, unless you set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to something else.
Tags are dropped, so any information stored in the WAV file's tags is not in the AC3 file.
Options
Set Audio bitrate (kbit/s) between 64 and 320. Higher values give a bigger file. Set Channels to 1 to mix down to mono, which halves the size and suits speech.
Set Sample rate (Hz) between 32000 and 48000. A lower rate gives a smaller file and dulls high sounds.
Reduce noise lowers steady background noise such as hum, hiss and fans. Normalize loudness brings the sound to -16 LUFS and also resamples to 44.1 kHz unless you set Sample rate (Hz).
Speed and trimming
Set Speed from 0.25 to 4 to play faster or slower. Voices keep their pitch.
Set Start at (s) to cut seconds from the beginning. Set Stop at (s) to end at a second of the original. It counts from the start of the original, so it must be later than Start at (s). To cut a file without changing its format, see trim WAV.
WAV and AC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
WAV Audio
Uncompressed PCM audio. Large files, no quality loss, the format editors and studios use.
- Extensions
- .wav
- MIME type
- audio
/wav - Kind
- Audio
AC-3 Audio
Dolby Digital audio, the surround sound of DVDs.
- Extensions
- .ac3
- MIME type
- audio
/ac3 - Kind
- Audio
In your code.The same WAV to AC3 conversion through the API, for your app or your agent.
$ cv convert recording.wav recording.ac3$ cv convert recording.wav recording.ac3Questions.What people ask about WAV to AC3.
No. Tags are dropped during conversion.
It uses 192 kbit/s unless you set Audio bitrate (kbit/s). The range is 64 to 320.
The conversion stops with input_corrupted when the file could not be parsed.
Yes. Use AC3 to WAV to convert it back.