Convert GSM to AC3
Turn GSM recordings into AC3. Re-encoded as Dolby Digital at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the GSM already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop GSM files on the dialor turn it to pick what to do
Telephone audio as Dolby Digital.The GSM recording is re-encoded as AC3 at 192 kbit/s by default.
What you get
One AC3 file, which is Dolby Digital audio, the surround sound of DVDs. By default it is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels.
You can change the bitrate, sample rate and channels with Audio bitrate (kbit/s), Sample rate (Hz) and Channels. Each setting you give replaces its default.
What it loses
The conversion is lossy. GSM audio was already compressed, and re-encoding it as AC3 loses a little more. The AC3 file does not restore anything the GSM recording had already lost.
Normalize loudness also resamples the audio to 44.1 kHz unless you set Sample rate (Hz).
Other options
Set Audio bitrate (kbit/s) between 64 and 320. Higher values make a bigger file. Set Channels to 1 to mix the sound down to mono, which suits speech.
Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Normalize loudness makes quiet and loud recordings play at -16 LUFS.
Set Start at (s) to cut seconds from the beginning, and Stop at (s) to stop at a second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at (s). Set Speed to play faster or slower while voices keep their pitch.
To go the other way, use AC3 to GSM.
GSM and AC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
GSM Audio
GSM 06.10 audio from telephony.
- Extensions
- .gsm
- MIME type
- audio
/x -gsm - Kind
- Audio
AC-3 Audio
Dolby Digital audio, the surround sound of DVDs.
- Extensions
- .ac3
- MIME type
- audio
/ac3 - Kind
- Audio
In your code.The same GSM to AC3 conversion through the API, for your app or your agent.
$ cv convert recording.gsm recording.ac3$ cv convert recording.gsm recording.ac3Questions.What people ask about GSM to AC3.
No. The conversion is lossy and loses a little more than the GSM already did.
192 kbit/s, unless you set Audio bitrate (kbit/s). It accepts values from 64 to 320.
Yes. Set Start at (s) to cut seconds from the beginning and Stop at (s) to end at a later second of the original.
Yes. Set Channels to 1 to mix the sound down to mono, which suits speech.