Convert WMA to EAC3

Turn WMA recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the WMA already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop WMA files on the dialor turn it to pick what to do

WMA audio re-encoded as Dolby Digital Plus.One EAC3 file at 192 kbit/s by default, with up to 5.1 channels.

  1. What you get

    A single EAC3 file, which is Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray. The sound is re-encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels, unless you set the options below.

  2. What changes

    The audio is re-encoded, so it loses a little more than the WMA already did. Tags are dropped, so the title, artist and other tag data do not carry over.

    Normalize loudness also resamples the sound to 44.1 kHz, unless you set Sample rate (Hz).

  3. Options

    Set Audio bitrate (kbit/s) to change how much data each second of sound gets, from 64 to 320. 128 is fine for speech and casual listening, and 192 to 320 suits music. Higher makes a bigger file.

    Set Channels from 1 to 6. 1 mixes the sound down to mono, and 2 keeps it stereo. Set Sample rate (Hz) from 32000 to 48000. Lower makes a smaller file and dulls high sounds.

    Set Start at (s) and Stop at (s) to cut the audio. Stop at counts from the start of the original, so it must be later than Start at. Set Speed to play faster or slower while voices keep their pitch, or Pitch to move the sound up or down by semitones at the same speed. Reduce noise lowers steady background noise such as hum, hiss and fans.

    To go the other way, use EAC3 to WMA.

WMA and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · WMA

Windows Media Audio

Windows Media Audio.

Extensions
.wma
MIME type
audio/x-ms-wma
Kind
Audio
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same WMA to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.wma recording.eac3
$ cv convert recording.wma recording.eac3

Questions.What people ask about WMA to EAC3.

01OF 04

No. Tags are dropped in the EAC3 file.

No. The audio is re-encoded, which loses a little more than the WMA already did.

Yes. Set Channels to 1 to mix the sound down to mono. Set it to 2 to keep it stereo.

Normalize loudness also resamples to 44.1 kHz. Set Sample rate (Hz) to choose another rate.

More conversions.Other ways in and out of WMA and EAC3.