Convert MP2 to M4A

Turn MP2 recordings into M4A. Re-encoded as AAC at 192 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise, which loses a little more than the MP2 already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop MP2 files on the dialor turn it to pick what to do

An M4A file from your MP2 audio.AAC at 192 kbit/s, with your tags still in place.

  1. What you get

    One M4A file, re-encoded as AAC at 192 kbit/s and at most 48 kHz. That is what you get unless you set Audio bitrate (kbit/s) or Sample rate (Hz) yourself. Tags are kept.

    The audio is re-encoded, so it loses a little more than the MP2 already did. The result is not a copy of the original sound.

    Turn on Lossless to store the sound as Apple Lossless (ALAC) instead of AAC, which keeps every sample of what is decoded. Audio bitrate (kbit/s) cannot be set together with it.

  2. Options you can set

    Set Audio bitrate (kbit/s) anywhere from 32 to 320. 128 is fine for speech and casual listening, and 192 to 320 suits music. Higher makes a bigger file.

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set it to 2 to keep stereo. Set Sample rate (Hz) to change how often the sound is measured. A lower rate makes a smaller file and dulls high sounds.

    Normalize loudness brings quiet and loud recordings to -16 LUFS, the level podcasts and streaming services aim for. It also resamples to 44.1 kHz unless you give Sample rate (Hz). Reduce noise lowers steady background noise such as hum, hiss and fans, and leaves sudden noises such as a door.

  3. Trim and speed

    Set Start at (s) to cut seconds from the beginning. Decimals such as 1.5 work. Set Stop at (s) to end at a given second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at (s).

    Set Speed from 0.25 to 4 to play faster or slower. Voices keep their pitch.

  4. Failures

    If the file cannot be parsed, the conversion stops with input_corrupted.

MP2 and M4A.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 8
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    8000 to 96000
  7. 07 · lossless

    Lossless

    Encodes without losing anything where the format can. The result is identical to the input in pixels or samples, and much bigger than a lossy one.

  8. 08 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  9. 09 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  10. 10 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · MP2

MP2 Audio

MPEG audio layer II, the sound of DVDs, DAB radio and broadcast.

Extensions
.mp2
MIME type
audio/mpeg
Kind
Audio
To · M4A

M4A Audio

AAC audio in an MP4 container. What Apple Music and iTunes use.

Extensions
.m4a
MIME type
audio/mp4
Kind
Audio

In your code.The same MP2 to M4A conversion through the API, for your app or your agent.

terminal
$ cv convert recording.mp2 recording.m4a
$ cv convert recording.mp2 recording.m4a

Questions.What people ask about MP2 to M4A.

01OF 04

Yes. Tags are kept in the M4A file.

No. The audio is re-encoded as AAC, which loses a little more than the MP2 already did.

Lower Audio bitrate (kbit/s) or Sample rate (Hz). Set Channels to 1 for mono, which halves the size and suits speech.

The file could not be parsed. The conversion stops with input_corrupted when that happens.

More conversions.Other ways in and out of MP2 and M4A.