Convert MP2 to AC3
Turn MP2 recordings into AC3. Re-encoded as Dolby Digital at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the MP2 already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop MP2 files on the dialor turn it to pick what to do
Dolby Digital from MP2 audio.One AC3 file, re-encoded at 192 kbit/s unless you set otherwise.
What you get
A single AC3 file in Dolby Digital. By default it is encoded at 192 kbit/s, at 32, 44.1 or 48 kHz, with up to 5.1 channels.
MP2 is already lossy, and the re-encode loses a little more. Tags are dropped.
Options that change the result
Set Audio bitrate (kbit/s) to override the default of 192. Values run from 64 to 320. 128 suits speech and casual listening, and 192 to 320 suits music. A higher value makes a bigger file.
Set Sample rate (Hz) to choose between 32000 and 48000. Set Channels to a value from 1 to 6. 1 mixes the sound down to mono, which halves its size and suits speech.
Set Speed to play faster or slower, from 0.25 to 4. Voices keep their pitch. Set Start at (s) to cut the beginning, and Stop at (s) to end at a given second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at (s).
Cleaning up the sound
Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
Turn on Normalize loudness to bring quiet and loud recordings to -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).
When it fails
A file that cannot be parsed stops the conversion with
input_corrupted. To go the other way, use AC3 to MP2.
MP2 and AC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
MP2 Audio
MPEG audio layer II, the sound of DVDs, DAB radio and broadcast.
- Extensions
- .mp2
- MIME type
- audio
/mpeg - Kind
- Audio
AC-3 Audio
Dolby Digital audio, the surround sound of DVDs.
- Extensions
- .ac3
- MIME type
- audio
/ac3 - Kind
- Audio
In your code.The same MP2 to AC3 conversion through the API, for your app or your agent.
$ cv convert recording.mp2 recording.ac3$ cv convert recording.mp2 recording.ac3Questions.What people ask about MP2 to AC3.
Yes, a little. MP2 is already lossy, and the re-encode to Dolby Digital loses a little more.
No. Tags are dropped from the AC3 file.
192 kbit/s unless you set Audio bitrate (kbit/s). The range is 64 to 320.
Yes. Set Start at (s) to cut the beginning and Stop at (s) to end at a later second of the original.