Convert MP2 to AAC

Turn MP2 recordings into AAC. Re-encoded as AAC in a raw stream at 160 kbit/s and at most 48 kHz, unless audio.bitrate or audio.sample_rate say otherwise, which loses a little more than the MP2 already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop MP2 files on the dialor turn it to pick what to do

MP2 audio as a raw AAC stream.One file at 160 kbit/s and at most 48 kHz, unless you set otherwise.

  1. What you get

    A single AAC file, a raw AAC stream, made by re-encoding the MP2 audio. The bitrate is 160 kbit/s and the sample rate is at most 48 kHz, unless you set Audio bitrate (kbit/s) or Sample rate (Hz) to something else.

    Both formats are lossy. The MP2 already lost some of the sound, and re-encoding as AAC loses a little more.

  2. What changes

    Tags are dropped. Turn on Normalize loudness and the sound is also resampled to 44.1 kHz, unless you set Sample rate (Hz). It levels quiet and loud recordings to -16 LUFS, the level podcasts and streaming services aim for.

  3. Options

    Set Audio bitrate (kbit/s) between 32 and 320. 128 suits speech and casual listening, and 192 to 320 suits music. A higher value makes a bigger file.

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Reduce noise lowers steady background noise such as hum, hiss and fans, and leaves sudden noises such as a door in.

    Set Start at (s) and Stop at (s) to cut the audio. Stop at counts from the start of the original, so it must be later than Start at. Set Speed to play faster or slower, and voices keep their pitch.

  4. When it stops

    If the MP2 cannot be parsed, the conversion stops with input_corrupted.

MP2 and AAC.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    32 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 8
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    8000 to 96000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · MP2

MP2 Audio

MPEG audio layer II, the sound of DVDs, DAB radio and broadcast.

Extensions
.mp2
MIME type
audio/mpeg
Kind
Audio
To · AAC

AAC Audio

Raw AAC audio streams.

Extensions
.aac
MIME type
audio/aac
Kind
Audio

In your code.The same MP2 to AAC conversion through the API, for your app or your agent.

terminal
$ cv convert recording.mp2 recording.aac
$ cv convert recording.mp2 recording.aac

Questions.What people ask about MP2 to AAC.

01OF 04

160 kbit/s, unless you set Audio bitrate (kbit/s). The sample rate is at most 48 kHz unless you set Sample rate (Hz).

Yes, a little. MP2 is lossy and AAC is lossy, so the re-encode loses a little more than the MP2 already did.

No. Tags are dropped during the conversion.

Yes. Set Start at (s) to cut from the beginning and Stop at (s) to end at a later second of the original. Trim AAC is also available.

More conversions.Other ways in and out of MP2 and AAC.