Convert MXF to AC3

Turn MXF videos into AC3. Encoded as Dolby Digital at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and lossy sound loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop MXF files on the dialor turn it to pick what to do

The sound of an MXF as AC3.Dolby Digital audio pulled from the video, with the picture dropped.

  1. What you get

    One AC3 file with the sound of the MXF, encoded as Dolby Digital at 192 kbit/s. The sample rate is 32, 44.1 or 48 kHz, and the file carries up to 5.1 channels.

    Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change these values.

  2. What changes or is left behind

    The picture is dropped, and so are the other audio tracks. AC3 is lossy, so the sound loses a little more than it already had.

    A video without sound cannot be converted. The conversion stops with unsupported_elements.

  3. Options for the sound

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. The range runs from 1 to 6, and 2 keeps stereo.

    Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Normalize loudness brings the sound to -16 LUFS. It also resamples to 44.1 kHz unless you give a Sample rate (Hz).

    Set Speed to play faster or slower, from 0.25 to 4, and voices keep their pitch. Set Start at (s) to cut seconds from the beginning.

MXF and AC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · MXF

MXF Video

MXF, the professional video container of broadcast and post-production.

Extensions
.mxf
MIME type
application/mxf
Kind
Video
To · AC3

AC-3 Audio

Dolby Digital audio, the surround sound of DVDs.

Extensions
.ac3
MIME type
audio/ac3
Kind
Audio

In your code.The same MXF to AC3 conversion through the API, for your app or your agent.

terminal
$ cv convert clip.mxf clip.ac3
$ cv convert clip.mxf clip.ac3

Questions.What people ask about MXF to AC3.

01OF 04

No. AC3 is an audio format, so the picture is dropped and only the sound is kept.

192 kbit/s, unless you set Audio bitrate (kbit/s). The range is 64 to 320.

The MXF has no sound. There is no audio to encode, so the conversion stops.

Yes. Set Start at (s) to the number of seconds to remove from the beginning. Decimals such as 1.5 work.

More conversions.Other ways in and out of MXF and AC3.