Convert SPH to WMA
Turn SPH recordings into WMA. Encoded as Windows Media Audio 2 at 160 kbit/s and at most 48 kHz in mono or stereo, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop SPH files on the dialor turn it to pick what to do
Speech recordings as WMA audio.One WMA file at 160 kbit/s, in mono or stereo, at up to 48 kHz.
What you get
A single WMA file encoded as Windows Media Audio 2. The default bitrate is 160 kbit/s, and the sample rate is at most 48 kHz. The sound stays in mono or stereo.
Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those defaults. Each one replaces the default for that setting.
Shaping the sound
Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set it to 2 to keep stereo.
Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
Turn on Normalize loudness to make quiet and loud recordings play at the same loudness, -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).
Set Pitch to move the sound up or down by whole semitones while the speed stays the same. Set Speed to play faster or slower. Voices keep their pitch.
Cutting the recording
Set Start at (s) to cut seconds from the beginning. Decimals such as 1.5 work. Set Stop at (s) to end at a second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at (s).
For other targets, see every WMA conversion.
SPH and WMA.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
32 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 2 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
8000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
NIST SPHERE Audio
Speech recordings in the NIST SPHERE format of the TIMIT and LDC speech corpora.
- Extensions
- .sph
- MIME type
- audio
/x -nist -sphere - Kind
- Audio
Windows Media Audio
Windows Media Audio.
- Extensions
- .wma
- MIME type
- audio
/x -ms -wma - Kind
- Audio
In your code.The same SPH to WMA conversion through the API, for your app or your agent.
$ cv convert recording.sph recording.wma$ cv convert recording.sph recording.wmaQuestions.What people ask about SPH to WMA.
160 kbit/s unless you set Audio bitrate (kbit/s). It accepts values from 32 to 320.
Yes. Set Channels to 1 to mix the sound down to mono. This halves its size and suits speech.
Yes. Set Start at (s) and Stop at (s). Stop at (s) counts from the start of the original recording.
The sample rate is at most 48 kHz by default. Set Sample rate (Hz) to choose one from 8000 to 48000. Normalize loudness resamples to 44.1 kHz unless you set it.