Convert SPH to AC3

Turn SPH recordings into AC3. Encoded as Dolby Digital at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop SPH files on the dialor turn it to pick what to do

Dolby Digital audio from a SPHERE recording.One AC3 file at 192 kbit/s, with the surround sound of DVDs.

  1. What you get

    A single AC3 file, which is Dolby Digital audio. It is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels. Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change any of these.

    The source is an SPH file, a speech recording in the NIST SPHERE format of the TIMIT and LDC speech corpora.

  2. Shaping the sound

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set it to 2 to keep stereo. Set Audio bitrate (kbit/s) to 128 for speech and casual listening, or to 192 to 320 for music. A higher bitrate makes a bigger file.

    Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Turn on Normalize loudness to make quiet and loud recordings play at the same loudness, -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).

  3. Trim, speed and pitch

    Set Start at (s) to cut seconds from the beginning. Decimals such as 1.5 work. Set Stop at (s) to end at a second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at (s).

    Set Speed to play faster or slower, such as 2 for twice as fast or 0.5 for half as fast. Voices keep their pitch. Set Pitch to move the sound up or down by whole semitones while the speed stays the same.

SPH and AC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · SPH

NIST SPHERE Audio

Speech recordings in the NIST SPHERE format of the TIMIT and LDC speech corpora.

Extensions
.sph
MIME type
audio/x-nist-sphere
Kind
Audio
To · AC3

AC-3 Audio

Dolby Digital audio, the surround sound of DVDs.

Extensions
.ac3
MIME type
audio/ac3
Kind
Audio

In your code.The same SPH to AC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.sph recording.ac3
$ cv convert recording.sph recording.ac3

Questions.What people ask about SPH to AC3.

01OF 04

192 kbit/s, unless you set Audio bitrate (kbit/s). The range is 64 to 320.

Yes. Set Channels to 1 for mono, which halves the size and suits speech. Without it, the file has up to 5.1 channels.

Yes. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).

Yes. Set Start at (s) and Stop at (s) to keep only the part between those seconds of the original.

More conversions.Other ways in and out of SPH and AC3.