Convert AMR to AC3

Turn AMR recordings into AC3. Re-encoded as Dolby Digital at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the AMR already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop AMR files on the dialor turn it to pick what to do

Phone recordings as Dolby Digital.An AMR recording becomes one AC3 file, re-encoded at 192 kbit/s by default.

  1. What you get

    One AC3 file in Dolby Digital. By default it is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels.

    Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those values. Each one overrides the default.

  2. What it changes

    The conversion re-encodes the sound. AMR already lost some detail, and AC3 loses a little more on top of that.

    Normalize loudness sets the recording to -16 LUFS, the level podcasts and streaming services aim for. It also resamples to 44.1 kHz unless you set Sample rate (Hz).

  3. Other options

    Set Channels to 1 to mix the sound down to mono, which suits speech. Lower Sample rate (Hz) for a smaller file, though high sounds get duller.

    Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door stay in.

    Set Start at (s) to cut the beginning. Set Stop at (s) to end earlier. Stop at (s) counts from the start of the original, so it must be later than Start at (s). Speed plays the audio faster or slower, and voices keep their pitch.

  4. When it fails

    If the file cannot be parsed, the conversion stops with input_corrupted. See every AMR conversion or every AC3 conversion for other routes.

AMR and AC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · AMR

AMR Audio

AMR speech audio from mobile phone recordings.

Extensions
.amr
MIME type
audio/amr
Kind
Audio
To · AC3

AC-3 Audio

Dolby Digital audio, the surround sound of DVDs.

Extensions
.ac3
MIME type
audio/ac3
Kind
Audio

In your code.The same AMR to AC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.amr recording.ac3
$ cv convert recording.amr recording.ac3

Questions.What people ask about AMR to AC3.

01OF 04

192 kbit/s by default. Set Audio bitrate (kbit/s) to a value from 64 to 320 to change it.

Yes. The audio is re-encoded, which loses a little more than the AMR already did.

Yes. Set Channels to 1 to mix the sound down to mono.

The file could not be parsed. The conversion stops with that code.

More conversions.Other ways in and out of AMR and AC3.