Convert AMR to EAC3
Turn AMR recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the AMR already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop AMR files on the dialor turn it to pick what to do
Phone recordings as Dolby Digital Plus.The AMR speech is re-encoded as EAC3 at 192 kbit/s. You get one file.
What you get
One EAC3 file in Dolby Digital Plus, made from your AMR recording. The default is 192 kbit/s at 32, 44.1 or 48 kHz with up to 5.1 channels.
You can change the bitrate, the sample rate and the channels with the options below.
What it changes
The audio is re-encoded, which loses a little more than the AMR already did. Normalize loudness also resamples to 44.1 kHz unless you set Sample rate (Hz).
Options
Set Audio bitrate (kbit/s) between 64 and 320. A higher value makes a bigger file. Set Channels to 1 to mix down to mono, which halves the size and suits speech.
Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Normalize loudness makes quiet and loud recordings play at -16 LUFS.
Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at.
Set Speed to play faster or slower while voices keep their pitch. Set Pitch to move the sound up or down by semitones at the same speed.
AMR and EAC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
AMR Audio
AMR speech audio from mobile phone recordings.
- Extensions
- .amr
- MIME type
- audio
/amr - Kind
- Audio
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
In your code.The same AMR to EAC3 conversion through the API, for your app or your agent.
$ cv convert recording.amr recording.eac3$ cv convert recording.amr recording.eac3Questions.What people ask about AMR to EAC3.
No. The file is re-encoded, which loses a little more than the AMR already did.
Yes. Set Audio bitrate (kbit/s) to a value from 64 to 320. Higher values make a bigger file.
Yes. Set Start at (s) to cut the beginning and Stop at (s) to end earlier. Stop at (s) counts from the start of the original.
Yes. Normalize loudness sets the level to -16 LUFS, and Reduce noise lowers steady background noise.