Convert GSM to EAC3
Turn GSM recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the GSM already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop GSM files on the dialor turn it to pick what to do
Telephone audio as Dolby Digital Plus.The GSM recording is re-encoded as E-AC-3 at 192 kbit/s, in one file.
What you get
One EAC3 file, re-encoded from the GSM audio. By default it uses 192 kbit/s, a sample rate of 32, 44.1 or 48 kHz, and up to 5.1 channels.
Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change these. Audio bitrate (kbit/s) runs from 64 to 320, Sample rate (Hz) from 32000 to 48000, and Channels from 1 to 6.
What it loses
GSM is already a lossy format, and E-AC-3 is lossy too. The conversion loses a little more than the GSM already did. Nothing is restored to the sound, so the result does not sound better than the source.
Set Channels to 1 to mix the sound down to mono, which suits speech. A higher Audio bitrate (kbit/s) makes a bigger file.
Shaping the sound
Set Normalize loudness to make quiet and loud recordings play at the same loudness, -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).
Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
Set Pitch to move the sound up or down by whole semitones from -12 to 12 without changing the speed. Set Speed to play faster or slower, from 0.25 to 4, and voices keep their pitch.
Set Start at (s) to cut seconds from the beginning. Set Stop at (s) to end at a second counted from the start of the original, so it must be later than Start at (s).
GSM and EAC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
GSM Audio
GSM 06.10 audio from telephony.
- Extensions
- .gsm
- MIME type
- audio
/x -gsm - Kind
- Audio
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
In your code.The same GSM to EAC3 conversion through the API, for your app or your agent.
$ cv convert recording.gsm recording.eac3$ cv convert recording.gsm recording.eac3Questions.What people ask about GSM to EAC3.
Yes. The audio is re-encoded as E-AC-3, which loses a little more than the GSM already did.
It is 32, 44.1 or 48 kHz unless you set Sample rate (Hz). If you turn on Normalize loudness without setting it, the file is resampled to 44.1 kHz.
Yes. Set Channels to 1 to mix the sound down to mono, which suits speech.
Yes. EAC3 to GSM goes the other way.