Convert M4R to EAC3
Turn M4R recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the AAC already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop M4R files on the dialor turn it to pick what to do
An iPhone ringtone as Dolby Digital Plus audio.The clip is re-encoded as E-AC-3 in one file. Tags and cover art are dropped.
What you get
One E-AC-3 file, which is Dolby Digital Plus audio. By default it is encoded at 192 kbit/s, at 32, 44.1 or 48 kHz, with up to 5.1 channels.
The audio is re-encoded, so it loses a little more than the AAC already did. Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those defaults.
What is left behind
Tags and cover art are dropped. The output carries only the sound.
Normalize loudness also resamples the audio to 44.1 kHz unless you set Sample rate (Hz).
Shaping the sound
Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second of the original. Stop at (s) counts from the start of the original, not from where trimming starts, so it must be later than Start at (s).
Set Speed to play faster or slower while voices keep their pitch. Set Pitch to move the sound up or down by semitones while the speed stays the same.
Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Normalize loudness brings quiet and loud recordings to -16 LUFS.
Set Channels to 1 to mix down to mono, which suits speech and halves the size of the sound.
M4R and EAC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
iPhone Ringtone
AAC ringtones for iPhone. The same container as M4A; the phone only accepts clips under 40 seconds.
- Extensions
- .m4r
- MIME type
- audio
/mp4 - Kind
- Audio
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
In your code.The same M4R to EAC3 conversion through the API, for your app or your agent.
$ cv convert recording.m4r recording.eac3$ cv convert recording.m4r recording.eac3Questions.What people ask about M4R to EAC3.
Yes. The M4R is re-encoded as Dolby Digital Plus, which loses a little more than the AAC already did.
No. Tags and cover art are dropped.
Yes. Set Audio bitrate (kbit/s) between 64 and 320. Without it, the default is 192 kbit/s.
Yes. Use EAC3 to M4R for the other direction.