Convert WAV to EAC3
Turn WAV recordings into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop WAV files on the dialor turn it to pick what to do
WAV audio as Dolby Digital Plus.One EAC3 file at 192 kbit/s, with up to 5.1 channels.
What you get
A single E-AC-3 file, the Dolby Digital Plus format used for surround sound on streaming services and Blu-ray. By default it is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels.
Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change any of these. Audio bitrate (kbit/s) takes 64 to 320, Sample rate (Hz) takes 32000 to 48000, and Channels takes 1 to 6.
What changes or is left behind
Tags are dropped. Any title, artist or other tags in the WAV are not in the EAC3 file.
Normalize loudness also resamples the sound to 44.1 kHz, unless you set Sample rate (Hz) yourself. It brings quiet and loud recordings to -16 LUFS.
Shaping the sound
Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set it to 2 to keep stereo.
Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
Set Pitch to move the sound up or down by whole semitones, from -12 to 12, while the speed stays the same. Set Speed to play faster or slower, from 0.25 to 4. Voices keep their pitch.
Set Start at (s) to cut seconds from the beginning, and Stop at (s) to end at a second of the original. Stop at (s) counts from the start of the original, so it must be later than Start at (s). For trimming alone, see trim WAV.
WAV and EAC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
WAV Audio
Uncompressed PCM audio. Large files, no quality loss, the format editors and studios use.
- Extensions
- .wav
- MIME type
- audio
/wav - Kind
- Audio
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
In your code.The same WAV to EAC3 conversion through the API, for your app or your agent.
$ cv convert recording.wav recording.eac3$ cv convert recording.wav recording.eac3Questions.What people ask about WAV to EAC3.
192 kbit/s unless you set Audio bitrate (kbit/s). It accepts 64 to 320. Higher makes a bigger file.
No. Tags are dropped in the conversion.
The output can carry up to 5.1 channels. Channels accepts 1 to 6.
Yes. Use EAC3 to WAV to turn the EAC3 file back into a WAV file.