Convert AIFF to EAC3

Turn AIFF recordings into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop AIFF files on the dialor turn it to pick what to do

AIFF audio as Dolby Digital Plus.One E-AC-3 file, with up to 5.1 channels, made from your AIFF audio.

  1. What you get

    A single EAC3 file. By default it is encoded as Dolby Digital Plus at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels.

    Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those defaults.

  2. What it leaves behind

    Tags are dropped, so title, artist and similar information from the AIFF do not carry over.

    Normalize loudness also resamples the sound to 44.1 kHz, unless you set Sample rate (Hz).

  3. Shaping the sound

    Set Normalize loudness to bring quiet and loud recordings to the same level, -16 LUFS. Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

    Set Start at (s) and Stop at (s) to cut the beginning or the end. Stop at (s) counts from the start of the original, so it must be later than Start at (s). Set Speed to play faster or slower while voices keep their pitch, or Pitch to move the sound up or down by whole semitones at the same speed.

    Set Channels to 1 to mix the sound down to mono. To go the other way, see EAC3 to AIFF.

AIFF and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · AIFF

AIFF Audio

Apple's uncompressed audio format, the Mac counterpart to WAV.

Extensions
.aiff .aif
MIME type
audio/aiff
Kind
Audio
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same AIFF to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.aiff recording.eac3
$ cv convert recording.aiff recording.eac3

Questions.What people ask about AIFF to EAC3.

01OF 04

192 kbit/s unless you set Audio bitrate (kbit/s). It accepts 64 to 320.

No. Tags are dropped in the conversion.

Yes. Set Channels to 1 and the sound is mixed down to mono.

Yes. Set Start at (s) to cut seconds from the beginning and Stop at (s) to end at a later second of the original.

More conversions.Other ways in and out of AIFF and EAC3.