Convert AMV to EAC3

Turn AMV videos into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and lossy sound loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop AMV files on the dialor turn it to pick what to do

The sound from an AMV video, as E-AC-3.Dolby Digital Plus audio at 192 kbit/s, with the picture left out.

  1. What you get

    One E-AC-3 file with the sound of the AMV video. The default is 192 kbit/s at 32, 44.1 or 48 kHz, with up to 5.1 channels. Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change any of these.

    E-AC-3 is lossy, and the AMV sound is already lossy. The result loses a little more than it already had.

  2. What it leaves behind

    The picture is dropped, because the output is audio only. Other audio tracks are dropped too, so only one track ends up in the file.

    A video without sound has nothing to convert, and the conversion stops with unsupported_elements.

  3. Shaping the sound

    Set Start at (s) and Stop at (s) to keep only part of the video. Stop at counts from the start of the original, so it must be later than Start at. Set Speed to play faster or slower while voices keep their pitch. Set Pitch to move the sound up or down by whole semitones without changing the speed.

    Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Set Normalize loudness to bring the sound to -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Lower Audio bitrate (kbit/s) or Sample rate (Hz) for a smaller file. A lower sample rate dulls high sounds.

AMV and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · AMV

AMV Video

Low-resolution video for cheap MP3 and MP4 players, a cut-down AVI with JPEG frames and ADPCM sound.

Extensions
.amv
MIME type
video/x-amv
Kind
Video
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same AMV to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert clip.amv clip.eac3
$ cv convert clip.amv clip.eac3

Questions.What people ask about AMV to EAC3.

01OF 04

No. Only the sound is kept. The picture is dropped, and so are any other audio tracks.

The video has no sound, so there is nothing to put in the E-AC-3 file.

Yes. Set Start at (s) to cut seconds from the beginning and Stop at (s) to end at a given second of the original.

192 kbit/s, unless you set Audio bitrate (kbit/s). The range is 64 to 320. See every EAC3 conversion for other ways to reach this format.

More conversions.Other ways in and out of AMV and EAC3.