Convert DAV to EAC3

Turn DAV videos into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and lossy sound loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop DAV files on the dialor turn it to pick what to do

The sound of a recording as E-AC-3.The audio of a DAV recording becomes one Dolby Digital Plus file. The picture is dropped.

  1. What you get

    One E-AC-3 file with the sound of the recording. It is encoded at 192 kbit/s and at 32, 44.1 or 48 kHz, with up to 5.1 channels. Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change this.

    The format is lossy, so the sound loses a little more than it already had.

  2. What it leaves behind

    The picture is dropped, and so are any other audio tracks. The date and time of the recording are not kept.

    A recording without sound cannot be converted and fails, because there is no audio to encode. For other formats, see every DAV conversion or every EAC3 conversion.

  3. Shaping the sound

    Audio bitrate (kbit/s) accepts 64 to 320. 128 is fine for speech and casual listening, and 192 to 320 suits music. Higher values make a bigger file. Set Channels to 1 to mix down to mono, which halves the size and suits speech.

    Reduce noise lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Normalize loudness brings the recording to -16 LUFS and resamples to 44.1 kHz unless you set Sample rate (Hz).

    Set Speed from 0.25 to 4 to play faster or slower, and voices keep their pitch. Set Pitch from -12 to 12 semitones to move the pitch while the speed stays the same.

    To cut part of the recording, set Start at (s) to remove seconds from the beginning. Set Stop at (s) to end at a second of the original. Stop at counts from the start of the original, so it must be later than Start at.

DAV and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · DAV

Dahua Video

Recordings exported from Dahua and other DVRs and security cameras.

Extensions
.dav
MIME type
video/x-dav
Kind
Video
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same DAV to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert clip.dav clip.eac3
$ cv convert clip.dav clip.eac3

Questions.What people ask about DAV to EAC3.

01OF 04

No. Only the sound is converted. The picture and any other audio tracks are dropped.

No. The date and time of the recording are not kept in the E-AC-3 file.

The conversion fails. The output is audio only, and there is none to encode.

Yes. Set Start at (s) and Stop at (s) to choose the part. Both count seconds from the start of the original.

More conversions.Other ways in and out of DAV and EAC3.