Convert MKV to EAC3

Turn MKV videos into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and lossy sound loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop MKV files on the dialor turn it to pick what to do

The sound of an MKV as an E-AC-3 file.Dolby Digital Plus audio at 192 kbit/s, with the picture left out.

  1. What you get

    One EAC3 file with the sound of the MKV, encoded as Dolby Digital Plus (E-AC-3). Unless you set otherwise, it uses 192 kbit/s, a sample rate of 32, 44.1 or 48 kHz, and up to 5.1 channels.

    The sound is lossy, so it loses a little more than it already had.

  2. What it leaves behind

    The picture is dropped. Other audio tracks are dropped too, so only one track ends up in the file. If you need the video, every MKV conversion lists the other ways to convert it.

    An MKV with no sound cannot be converted. The conversion stops with unsupported_elements.

  3. Options

    Set Audio bitrate (kbit/s) between 64 and 320. Higher gives a bigger file, and 192 to 320 suits music. Set Sample rate (Hz) between 32000 and 48000. Lower gives a smaller file and dulls high sounds. Set Channels from 1 to 6. A value of 1 mixes the sound down to mono, which suits speech.

    Set Start at (s) and Stop at (s) to keep only part of the recording. Stop at counts from the start of the original, so it must be later than Start at. Set Speed between 0.25 and 4 to play faster or slower, and voices keep their pitch. Set Pitch from -12 to 12 semitones to move the pitch without changing the speed.

    Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Set Normalize loudness to bring quiet and loud recordings to -16 LUFS. Normalizing also resamples the sound to 44.1 kHz unless you set Sample rate (Hz).

MKV and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · MKV

Matroska Video

Matroska, an open container that holds any codec plus multiple audio and subtitle tracks.

Extensions
.mkv
MIME type
video/x-matroska
Kind
Video
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same MKV to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert clip.mkv clip.eac3
$ cv convert clip.mkv clip.eac3

Questions.What people ask about MKV to EAC3.

01OF 04

No. The picture is dropped, and the output is an audio file only.

They are dropped. Only one audio track is converted.

The video has no sound, so there is nothing to encode. The conversion stops with unsupported_elements.

Yes. Set Start at (s) to cut the beginning, and set Stop at (s) to end at a later second of the original.

More conversions.Other ways in and out of MKV and EAC3.