Convert MPG to EAC3

Turn MPG videos into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and lossy sound loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop MPG files on the dialor turn it to pick what to do

The sound of an MPG file as E-AC-3.One audio file in Dolby Digital Plus, with the picture left out.

  1. What you get

    One E-AC-3 file made from the sound of your MPG, VOB or MPEG video. By default it is encoded at 192 kbit/s, at 32, 44.1 or 48 kHz, with up to 5.1 channels.

    Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those values. Audio bitrate (kbit/s) runs from 64 to 320. Set it to 128 for speech and casual listening, or 192 to 320 for music. Higher makes a bigger file.

  2. What changes or is dropped

    The picture is dropped, and so are any other audio tracks. A video without sound has nothing to convert, so the conversion stops with unsupported_elements.

    E-AC-3 is lossy, so the sound loses a little more than it already had.

  3. Shaping the sound

    Set Channels to 1 to mix the sound down to mono, which halves its size and suits speech. Set it to 2 to keep stereo.

    Set Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in. Set Normalize loudness to play quiet and loud recordings at the same loudness, -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz).

    Set Pitch to move the sound up or down by whole semitones without changing the speed. Set Speed to play faster or slower, from 0.25 to 4, and voices keep their pitch.

  4. Cutting a section

    Set Start at (s) to cut seconds from the beginning. Decimals such as 1.5 work. Set Stop at (s) to end at a second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at (s).

MPG and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · MPG

MPEG Video

MPEG-1 and MPEG-2 video, the formats of VCDs and DVDs.

Extensions
.mpg .mpeg .vob
MIME type
video/mpeg
Kind
Video
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same MPG to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert clip.mpg clip.eac3
$ cv convert clip.mpg clip.eac3

Questions.What people ask about MPG to EAC3.

01OF 04

No. The picture is dropped, and the result is one audio file.

The conversion stops with unsupported_elements, because there is no audio to encode.

Yes, up to 5.1 channels by default. Set Channels to 2 for stereo or 1 for mono.

Yes. Set Start at (s) and Stop at (s) to keep only the section you want. Stop at (s) counts from the start of the original.

More conversions.Other ways in and out of MPG and EAC3.