Convert OPUS to EAC3
Turn OPUS recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the Opus already did.
Converted in an isolated sandbox on our serversDeleted after 24 hours
Drop OPUS files on the dialor turn it to pick what to do
Opus audio as Dolby Digital Plus.One file at 192 kbit/s with up to 5.1 channels, unless you set the options yourself.
What you get
A single E-AC-3 file, Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray. By default it is encoded at 192 kbit/s, at 32, 44.1 or 48 kHz, with up to 5.1 channels.
Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change those defaults. Audio bitrate (kbit/s) runs from 64 to 320, Sample rate (Hz) from 32000 to 48000, and Channels from 1 to 6.
What changes or is left behind
The audio is encoded again, and both Opus and E-AC-3 are lossy. That loses a little more than the Opus already did.
Tags and cover art are dropped. They are not carried into the E-AC-3 file.
Shaping the sound
Set Trim start and end with Start at (s) and Stop at (s). Stop at (s) counts from the start of the original, not from where trimming starts, so it must be later than Start at (s).
Set Speed to play faster or slower while voices keep their pitch. Set Pitch to move the sound up or down by whole semitones at the same speed.
Turn on Reduce noise to lower steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
Turn on Normalize loudness to bring quiet and loud recordings to -16 LUFS. Normalizing also resamples to 44.1 kHz unless you set Sample rate (Hz). To go the other way, see EAC3 to OPUS.
OPUS and EAC3.What each format is, and the options this conversion takes.
- 01 · audio.bitrate
Audio bitrate (kbit/s)
How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.
64 to 320 - 02 · audio.channels
Channels
1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.
1 to 6 - 03 · audio.denoise
Reduce noise
Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.
- 04 · audio.normalize
Normalize loudness
Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.
- 05 · audio.pitch
Pitch
Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.
-12 to 12 - 06 · audio.sample_rate
Sample rate (Hz)
How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.
32000 to 48000 - 07 · speed
Speed
Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.
0.25 to 4 - 08 · trim_end
Stop at (s)
Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.
0 to 86400 - 09 · trim_start
Start at (s)
Cuts this many seconds from the beginning. Decimals such as 1.5 work.
0 to 86400
The formats
Opus Audio
Opus audio, the best lossy codec for speech and music at low bitrates.
- Extensions
- .opus
- MIME type
- audio
/opus - Kind
- Audio
E-AC-3 Audio
Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.
- Extensions
- .eac3 .ec3
- MIME type
- audio
/eac3 - Kind
- Audio
In your code.The same OPUS to EAC3 conversion through the API, for your app or your agent.
$ cv convert recording.opus recording.eac3$ cv convert recording.opus recording.eac3Questions.What people ask about OPUS to EAC3.
Yes, a little. The audio is re-encoded, and both formats are lossy, so it loses a little more than the Opus already did.
No. Tags and cover art are dropped from the E-AC-3 file.
Yes. Set Channels to 2 to keep stereo, or to 1 to mix the sound down to mono, which suits speech.
By default it is 32, 44.1 or 48 kHz. Set Sample rate (Hz) to choose a value from 32000 to 48000. Normalizing resamples to 44.1 kHz unless you set it.