Convert SPX to EAC3

Turn SPX recordings into EAC3. Re-encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, which loses a little more than the Speex already did.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop SPX files on the dialor turn it to pick what to do

Speex speech as Dolby Digital Plus.The Ogg Speex file is re-encoded as E-AC-3 at 192 kbit/s unless you set otherwise.

  1. What you get

    One EAC3 file, re-encoded as Dolby Digital Plus. The default is 192 kbit/s at 32, 44.1 or 48 kHz, with up to 5.1 channels. Set Audio bitrate (kbit/s), Sample rate (Hz) or Channels to change any of these.

    Speex is a speech format and the predecessor of Opus. E-AC-3 is the surround sound of streaming services and Blu-ray.

  2. What changes

    The conversion is lossy. The Speex audio already lost detail when it was made, and the re-encode loses a little more.

    Tags are dropped. Normalize loudness also resamples to 44.1 kHz unless you set Sample rate (Hz).

  3. Shaping the sound

    Set Audio bitrate (kbit/s) between 64 and 320. 128 is fine for speech and casual listening, and higher values make a bigger file. Set Channels to 1 to mix down to mono, which halves the size and suits speech.

    Set Reduce noise to lower steady hum, hiss and fans. Sudden noises such as a door are left in. Set Normalize loudness to play quiet and loud recordings at -16 LUFS.

    Set Start at (s) and Stop at (s) to cut the recording. Stop at (s) counts from the start of the original, so it must be later than Start at (s). Set Speed to play faster or slower with the voice pitch kept, or Pitch to move the sound up or down by semitones at the same speed.

SPX and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · SPX

Speex

Speex speech audio in an Ogg container, the predecessor of Opus.

Extensions
.spx
MIME type
audio/x-speex
Kind
Audio
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same SPX to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert recording.spx recording.eac3
$ cv convert recording.spx recording.eac3

Questions.What people ask about SPX to EAC3.

01OF 04

No. Tags are dropped in the conversion.

No. The Speex audio already lost detail, and the re-encode loses a little more.

Yes. Set Channels to 1 to mix the sound down to mono. This halves its size and suits speech.

Yes. Set Start at (s) to cut seconds from the beginning and Stop at (s) to end at a second of the original. Decimals such as 1.5 work for Start at (s).

More conversions.Other ways in and out of SPX and EAC3.