Convert WMV to EAC3

Turn WMV videos into EAC3. Encoded as Dolby Digital Plus (E-AC-3) at 192 kbit/s and at 32, 44.1 or 48 kHz with up to 5.1 channels, unless audio.bitrate, audio.sample_rate or audio.channels say otherwise, and lossy sound loses a little more than it already had.

Converted in an isolated sandbox on our serversDeleted after 24 hours

Drop WMV files on the dialor turn it to pick what to do

The sound of a WMV as an E-AC-3 file.Only the audio track is kept, as Dolby Digital Plus at 192 kbit/s by default.

  1. What you get

    One EAC3 file with the sound from the WMV. It is encoded as Dolby Digital Plus at 192 kbit/s, at 32, 44.1 or 48 kHz, with up to 5.1 channels, unless you set the options below.

    The sound is lossy, so it loses a little more than it already had.

  2. What is left behind

    The picture is dropped, and so are any other audio tracks. Only one audio track ends up in the file.

    A video with no sound has nothing to convert, and the conversion stops with unsupported_elements.

  3. Options for the sound

    Set Audio bitrate (kbit/s) between 64 and 320. 128 suits speech and casual listening, and 192 to 320 suits music. A higher value makes a bigger file.

    Set Channels to 1 to mix down to mono, which halves the size and suits speech, or to 2 to keep stereo. Set Sample rate (Hz) between 32000 and 48000. A lower rate makes a smaller file and dulls high sounds.

    Turn on Reduce noise to lower steady hum, hiss and fans. Sudden noises such as a door stay in. Turn on Normalize loudness to bring the sound to -16 LUFS, and note that it also resamples to 44.1 kHz unless you set Sample rate (Hz).

    Set Speed from 0.25 to 4 to play faster or slower while voices keep their pitch. Set Pitch from -12 to 12 semitones to move the pitch without changing the speed.

    Set Start at (s) to cut seconds from the beginning. Set Stop at (s) to end at a second counted from the start of the original, so it must be later than Start at (s).

WMV and EAC3.What each format is, and the options this conversion takes.

  1. 01 · audio.bitrate

    Audio bitrate (kbit/s)

    How much data each second of sound gets. 128 is fine for speech and casual listening, 192 to 320 for music. Higher makes a bigger file.

    64 to 320
  2. 02 · audio.channels

    Channels

    1 mixes the sound down to mono, which halves its size and suits speech. 2 keeps it stereo.

    1 to 6
  3. 03 · audio.denoise

    Reduce noise

    Lowers steady background noise such as hum, hiss and fans. Sudden noises such as a door are left in.

  4. 04 · audio.normalize

    Normalize loudness

    Makes quiet and loud recordings play at the same loudness, -16 LUFS, the level podcasts and streaming services aim for.

  5. 05 · audio.pitch

    Pitch

    Moves the pitch up or down by whole semitones while the speed stays the same. 12 is one octave up and -12 one octave down.

    -12 to 12
  6. 06 · audio.sample_rate

    Sample rate (Hz)

    How many times per second the sound is measured. 44100 is the CD rate and 48000 the video rate. Lower makes a smaller file and dulls high sounds.

    32000 to 48000
  7. 07 · speed

    Speed

    Plays faster or slower. 2 is twice as fast and 0.5 half as fast. Voices keep their pitch.

    0.25 to 4
  8. 08 · trim_end

    Stop at (s)

    Stops at this second of the original. It counts from the start of the original, not from where trimming starts, so it must be later than Start at.

    0 to 86400
  9. 09 · trim_start

    Start at (s)

    Cuts this many seconds from the beginning. Decimals such as 1.5 work.

    0 to 86400

The formats

From · WMV

Windows Media Video

Windows Media Video.

Extensions
.wmv .asf
MIME type
video/x-ms-wmv
Kind
Video
To · EAC3

E-AC-3 Audio

Dolby Digital Plus audio, the surround sound of streaming services and Blu-ray.

Extensions
.eac3 .ec3
MIME type
audio/eac3
Kind
Audio

In your code.The same WMV to EAC3 conversion through the API, for your app or your agent.

terminal
$ cv convert clip.wmv clip.eac3
$ cv convert clip.wmv clip.eac3

Questions.What people ask about WMV to EAC3.

01OF 04

No. The picture is dropped, and only the sound is written to the EAC3 file.

The video has no sound, so there is no audio to encode. The conversion stops with unsupported_elements.

Yes. Lower Audio bitrate (kbit/s), set Channels to 1 for mono, or lower Sample rate (Hz). A lower sample rate also dulls high sounds.

Yes. Set Start at (s) and Stop at (s). Stop at (s) counts from the start of the original.

More conversions.Other ways in and out of WMV and EAC3.